Description
The Hornady 546201 Series I 2-Die Set is a Custom-Grade full-length setup built for anyone loading the fast little .204 Ruger. You get two dies in the box: a full-length sizing die that returns fired brass back to spec, and a bullet seating die that puts your bullets exactly where you want them. These are the dies a lot of folks reach for when they want factory-level consistency without jumping up to a micrometer match set, and the fit and finish lives up to the Hornady name.
What Sets the 546201 Series I Set Apart
The sizing die features Hornady's Zip Spindle, which uses light threads cut into the spindle and collet so you can make fine adjustments by turning it or zip it up and down for bigger moves. No more knuckle-busting to lock the spindle in place. The elliptical expander is another nice touch, since it reduces friction and case neck stretch compared to a traditional ball expander, which means longer case life and smoother strokes on the press.
Seating and Setup on the 204 Ruger Dies
The seating die uses a floating alignment sleeve that pre-aligns the bullet and case neck before the bullet ever starts into the case. That pre-alignment is where a lot of your on-paper accuracy comes from, especially with the light, high-velocity bullets the .204 Ruger runs. There's also a built-in roll crimp option if you want it, so you can crimp without burning a station on a separate die.
Built to Last
Hornady starts these with select steel that's heat-treated for durability, then hand-polishes the inside of the sizing die to a mirror finish so it won't scratch your brass. The set ships in a compartmentalized plastic storage box and includes two Sure-Loc lock rings with wrench flats. Custom-Grade dies carry Hornady's reputation for lasting a lifetime of normal reloading. Keep in mind the shell holder is sold separately, so grab a #16 if you don't already have one on the bench.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546201
- UPC: 090255562019
- Caliber: .204 Ruger
- Product Type: Full Length Die Set
- Series: Custom-Grade Series I
- Number of Dies: 2
- Die Types: Full-Length Sizing, Bullet Seating
- Spindle: Zip Spindle with collet lock
- Expander: Elliptical expander
- Lock Rings: Sure-Loc with wrench flats
- Shell Holder: #16 (sold separately)
- Length: 7.5 in
- Shipping Weight: 1.4 lbs
What’s Included
- Full-length sizing die
- Bullet seating die with built-in crimper
- Two Sure-Loc lock rings with wrench flats
- Compartmentalized plastic storage box
Frequently Asked Questions
Does the Hornady 546201 die set come with a shell holder?
No, the shell holder is sold separately with this set. For the .204 Ruger you'll want a Hornady #16 shell holder, which also fits cartridges like the .223 Remington. If you already load .223, there's a good chance you have one on the bench already.
What dies are included in this .204 Ruger set?
You get two dies: a full-length sizing die and a bullet seating die. The sizing die resizes the whole case back to spec and deprimes it, while the seating die sets your bullet to the depth you dial in. The seating die also has a built-in roll crimp option if you choose to use it.
What is the Zip Spindle on the Hornady 546201 sizing die?
The Zip Spindle has light threads cut into the spindle and collet so you can fine-tune adjustments by turning it, or zip it up and down quickly for larger moves. It locks in place with a collet lock to prevent slippage during sizing. It makes setting your decapping depth and expander position a lot easier.
Will these dies work on a standard reloading press?
Yes, these are standard 7/8-14 threaded dies that thread into any common single-stage or progressive press. Pair them with the correct #16 shell holder and you're set to load .204 Ruger. The Sure-Loc rings make it easy to pull the dies and return them to the same setting later.





Reviews
There are no reviews yet.