0
0

Hornady Match Grade 2-Die Set .300 WSM 545160 w/ Micrometer

UPC: 090255551600

$165.99

19 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading precision .300 Winchester Short Magnum and want tighter groups without burning through brass, this Hornady Match Grade 2-die set is built for exactly that. The heart of the system is a full-length bushing sizing die that lets you pick your own neck tension instead of accepting whatever a standard die hands you. The bushing floats and self-centers on the case neck, so your necks come out concentric and your brass lasts through more firings before it needs trimming or tossing.

What Sets the Match Grade .300 WSM Dies Apart

Standard full-length dies oversize the neck and then an expander ball pulls it back open, working the brass harder than it needs to be. This set skips that whole problem. You drop in a cartridge-specific bushing sized to your exact brass and bullet combo, and the die only brings the neck down to where you want it. Tight tolerances at the press translate directly into tighter groups downrange, and you keep full-length sizing so your rounds still chamber reliably in a hunting or match rifle.

The Seating Die and Click-Adjust Micrometer

For 2025 the seating die comes with Hornady's Click-Adjust Bullet Seating Micrometer factory installed. It gives you tactile clicks for .001 inch adjustments, so you can repeat a seating depth or chase the lands without guesswork or feeler gauges. That kind of repeatability matters a lot when you're load developing and trying to isolate one variable at a time.

Picking Your Bushing for the .300 WSM Set

One thing to know going in: the neck bushings are sold separately, which is by design so you can tune neck tension to your brass. The quick method is to measure the outside diameter of a loaded case neck and subtract about .002 to .003, then order a bushing at or just under that number. Bushings come in small increments, and it's smart to grab one size above and below your target so you have room to experiment.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 545160
  • UPC: 090255551600
  • Caliber: .300 Winchester Short Magnum (WSM)
  • Bullet Diameter: .308
  • Die Set: 2-Die Set
  • Die Type: Full-Length Bushing Sizing, Bullet Seating
  • Seating Die Feature: Factory-installed Click-Adjust Micrometer
  • Thread: 7/8-14
  • Material: Steel
  • Primary Application: Target / Match
  • Country of Origin: USA
  • Shipping Weight: 1.734

What’s Included

  • Full-length bushing sizing die
  • In-line bullet seating die with Click-Adjust Micrometer
  • Two Sure-Loc lock rings
  • Elliptical expander and decap pin retainer
  • Plastic storage box

Frequently Asked Questions

Does the Hornady Match Grade .300 WSM die set come with the neck bushing?

No, the neck bushings are sold separately and that's intentional. Hornady leaves them out so you can match the bushing to your specific brass and the neck tension you want. You'll need to pick up at least one cartridge-specific bushing to complete the set before you can size necks.

How do I figure out the right bushing size for my .300 WSM brass?

Measure the outside diameter of a loaded case neck, then subtract about .002 to .003 inches and order a bushing at or just under that number. You can also measure neck wall thickness, double it, add the .308 bullet diameter, then subtract for tension. It's a good idea to buy one bushing above and one below your target so you have room to fine-tune.

What's the Click-Adjust Micrometer on the seating die?

It's Hornady's micrometer seating adjustment that gives you tactile clicks for precise .001 inch changes to seating depth. For 2025 it comes factory installed on the Match Grade seating die, so you can repeat a depth setting or chase the lands during load development without fuss.

Is this a full-length die set or neck-sizing only?

This is a full-length bushing sizing die paired with a seating die. It sizes the case back toward SAAMI minimum spec so your rounds chamber reliably, while the interchangeable bushing lets you control neck tension instead of overworking the brass with a traditional expander ball.

Additional information

UPC

090255551600

Manufacturer

Manufacturer Part Number

545160

Caliber/Gauge

.300 Winchester Short Magnum (WSM)

Shipping Weight

1.734

Reviews

There are no reviews yet.

Be the first to review “Hornady Match Grade 2-Die Set .300 WSM 545160 w/ Micrometer”