0
0

Hornady Match Grade Die Set 6.5 PRC with Click-Adjust Micrometer

UPC: 090255551334

$165.99

12 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Hornady built the Match Grade die set for handloaders who want tight groups and consistent brass life out of their 6.5 PRC. The real story here is control. Instead of squeezing the case neck down and dragging it back open over an expander ball, the full-length sizing die uses interchangeable, self-centering neck bushings. That lets you dial in exactly how much neck tension you want, which means less work-hardening on your brass and straighter, more concentric ammo coming off the press.

What Sets the 6.5 PRC Match Grade Dies Apart

The sizing die runs a free-floating, self-centering spindle with a knurled lock that makes swapping bushings quick. You also get an elliptical expander that's precision-polished to cut friction and reduce case-neck stretch, plus a replaceable headed decap pin that's unique to Hornady. The bushing system plays nice with your existing kit too, since Hornady Match Grade bushings are interchangeable with Redding, Wilson, and RCBS bushings.

The Click-Adjust Micrometer on the Seating Die

This is the big news for the newer sets. Hornady introduced the Click-Adjust Bullet Seating Micrometer in 2024, and for 2025 it now comes factory installed on the Match Grade seating die. You get tactile clicks in .001-inch increments, so you can feel each adjustment instead of squinting at a scale. The seater itself uses a floating sleeve that aligns the bullet to the case before it ever enters the die body, which is a big part of why these throw rounds with low runout. Folks loading 6.5 PRC with these have reported groups in the twos once they find their load.

A Note on Bushings

Worth knowing up front: the neck sizing bushing is sold separately so you can match it precisely to your brass and chamber. A common starting point is to measure a loaded round at the neck and subtract about .001 inch to pick your bushing diameter. Pair it with a shoulder bump gauge and you've got a setup that competition and long-range hunting handloaders lean on hard.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 545133
  • UPC: 090255551334
  • Caliber: 6.5 PRC (.264)
  • Series: Match Grade
  • Number of Dies: 2
  • Die Type: Bushing Full-Length Sizer and Bullet Seater
  • Seating Die: Click-Adjust Micrometer, factory installed
  • Micrometer Adjustment: .001 inch increments
  • Thread Size: 7/8-14
  • Neck Bushing: Sold separately
  • Shellholder: Not included
  • Country of Origin: USA
  • Shipping Weight: 1.704 lbs

What’s Included

  • Full-length bushing sizing die
  • Bullet seating die with Click-Adjust Micrometer and roll crimp
  • Two Sure-Loc lock rings
  • Plastic storage box

Frequently Asked Questions

Does the Hornady Match Grade 6.5 PRC die set come with a neck bushing?

No, the neck sizing bushing is sold separately so you can pick the exact size for your brass and chamber. A good starting point is to measure the neck of a loaded round and subtract about .001 inch to find your bushing diameter. The good news is Hornady bushings are interchangeable with Redding, Wilson, and RCBS bushings, so you may already have one that fits.

What is the Click-Adjust Micrometer on this seating die?

It's Hornady's bullet seating micrometer that gives you tactile clicks in .001-inch increments, so you can feel each seating depth change rather than reading a scale. Hornady introduced it in 2024, and for 2025 it now ships factory installed on the Match Grade seating die. It makes dialing in and returning to a load noticeably easier.

Is this a full-length sizing die set or a neck sizing set?

This set uses a full-length bushing sizing die, which sizes the body and bumps the shoulder while still letting you control neck tension through the interchangeable bushing. Pairing it with a shoulder bump gauge helps you set the die so you're only pushing the shoulder back a couple thousandths. That combination keeps your 6.5 PRC brass fitting the chamber consistently without overworking it.

Does the set include a shellholder?

No, a shellholder is not included with this die set. You'll need the correct shellholder for 6.5 PRC to run the cases in your press. It does come with a plastic storage box and two Sure-Loc lock rings.

Additional information

UPC

090255551334

Manufacturer

Manufacturer Part Number

545133

Caliber/Gauge

6.5 PRC

Shipping Weight

1.704

Reviews

There are no reviews yet.

Be the first to review “Hornady Match Grade Die Set 6.5 PRC with Click-Adjust Micrometer”