0
0

Hornady Match Grade 6mm ARC Full Length 2-Die Set w/ Micrometer

UPC: 090255551129

$165.99

22 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Precision reloading comes down to controlling the two things that move groups: neck tension and seating depth. This Hornady Match Grade 2-die set for the 6mm ARC gives you a handle on both. It pairs a full-length bushing sizing die with an in-line bullet seating die, and the big news for this version is that the Click-Adjust seating micrometer now comes factory installed rather than sold as an add-on. If you have been chasing consistent cartridge overall length for your ARC loads, this is the setup that makes it easy to repeat.

What the Match Grade Bushing Design Does for Your Brass

The sizing die runs on interchangeable, self-centering neck size bushings instead of a fixed neck diameter with a traditional expander ball. That matters because the usual squeeze-then-expand process works the brass twice, which shortens case life and can pull necks out of concentricity. With a bushing, you size the neck to one chosen diameter in a single pass, so your brass lasts longer and runs truer. You pick the bushing that matches your neck thickness and the amount of tension you want, generally subtracting a couple thousandths from your loaded neck diameter.

Dialing in the 6mm ARC Seating Die

The in-line seating die is where the Click-Adjust micrometer earns its keep. It gives you tactile clicks in .001" increments, so you can note a setting, change it, and come right back without guesswork or a wrench. For a cartridge like the 6mm ARC that rewards careful seating depth tuning, that repeatability is a real advantage at the bench and on paper.

A Few Things to Know Before You Order

The dies use standard 7/8"-14 threads, so they drop into any common reloading press. Keep in mind the neck size bushing is sold separately and is chosen to match your specific brass, so plan to grab the right bushing to complete the set. A shellholder is also not included. Made in the USA and backed by Hornady's lifetime warranty.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 545112
  • UPC: 090255551129
  • Caliber: 6mm ARC (.243)
  • Set Type: Match Grade 2-Die Set
  • Dies Included: Full Length Bushing Sizing Die, In-Line Bullet Seating Die
  • Seating Micrometer: Click-Adjust, factory installed, .001" increments
  • Die Threads: 7/8"-14
  • Neck Bushing: Sold separately, interchangeable and self-centering
  • Shellholder: Not included
  • Storage: Plastic storage box included
  • Lock Rings: Sure-Loc rings included
  • Country of Origin: USA
  • Warranty: Hornady lifetime warranty

What’s Included

  • Full length bushing sizing die
  • In-line bullet seating die with factory-installed Click-Adjust micrometer
  • Sure-Loc lock rings
  • Plastic storage box
  • Instructions

Frequently Asked Questions

Does the Hornady Match Grade 6mm ARC die set come with a neck bushing?

No, the neck size bushing is sold separately and is not included with the set. You select the bushing diameter based on your brass neck thickness and the neck tension you want. A common starting point is subtracting about .002" from your loaded neck diameter, and keeping a bushing one size above and below is handy for tuning.

What is different about the Click-Adjust micrometer on this die set?

The Click-Adjust seating micrometer now comes factory installed on this Match Grade seating die rather than being a separate add-on. It provides tactile clicks in .001" increments, so you can change seating depth and return to a known setting without a wrench or guesswork. For dialing in loads in the 6mm ARC, that repeatability makes seating depth testing much simpler.

Will these dies fit my reloading press?

Yes. The dies use standard 7/8"-14 threads, which is the common size used by nearly all single-stage and progressive presses. You will still need the correct 6mm ARC shellholder, which is not included in the set.

Why use bushing dies instead of standard sizing dies for the 6mm ARC?

A bushing sizing die lets you control neck tension directly and avoids the traditional squeeze-then-expand step that works the brass twice. That reduces overworking of the case necks, which helps brass last longer and stay more concentric. For precision shooting, that consistency often translates to tighter groups downrange.

Additional information

UPC

090255551129

Manufacturer

Manufacturer Part Number

545112

Caliber/Gauge

6mm ARC

Shipping Weight

1.665

Reviews

There are no reviews yet.

Be the first to review “Hornady Match Grade 6mm ARC Full Length 2-Die Set w/ Micrometer”

Related Products