Description
If you shoot the 7mm-08 Remington, this Hornady Series I 2-Die Set covers the two jobs that matter most at the bench: resizing fired brass back to spec and seating bullets straight and true. It's part of Hornady's Custom-Grade New Dimension lineup, which starts with carefully selected steel that gets heat-treated for durability, then hand-polished to a mirror finish inside the sizing die so your cases come out smooth instead of scratched. These dies thread into any standard 7/8-14 press, so they'll drop right into whatever single-stage or turret setup you already own.
What You Get in the Hornady 7mm-08 Die Set
The set includes a full-length sizing die and a bullet seating die, both machined to Hornady's tight tolerances. The sizer handles the whole case body and neck to bring brass back into chamber spec, while the elliptical expander ball glides through the neck to cut down on friction and case stretch. That expander is a threaded, replaceable part, and the hardened steel decapping pin stands up to knocking out stubborn primers, even crimped military-style pockets, without bending or snapping.
Dialing In the 7mm-08 Series I Dies
Adjustment is where these really shine. The Zip Spindle design uses fine threads on the spindle and collet to lock the decapping assembly firmly in place, which kills the slippage and knuckle-busting you get with older designs. Up top, the Sure-Loc lock rings clamp around the die and hold tension across the threads, with a locking screw that tightens the ring without ever digging into the die threads. The seating die runs an in-line system that keeps the bullet, case neck, and seating stem in alignment for consistent overall length and better concentricity, which translates to tighter groups downrange.
Built to Outlast the Rifle
Hornady backs these with a no-risk lifetime guarantee against breaking or wearing out under normal use, and everything stores in the included compartmentalized box so your adjusted dies stay protected between sessions. Keep in mind the shell holder is sold separately, so grab a #1 shell holder if you don't already have one on the bench.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 546316
- UPC: 090255563160
- Caliber: 7mm-08 Remington (.284)
- Product Type: Full Length 2-Die Set
- Die Series: Series I (Custom-Grade New Dimension)
- Dies Included: Full-Length Sizing Die, Bullet Seating Die
- Number of Dies: 2
- Thread Size: 7/8-14
- Spindle Design: Zip Spindle
- Lock Rings: Sure-Loc with wrench flats
- Shell Holder: Not included (uses #1)
- Storage Box: Included
- Country of Origin: United States
- Shipping Weight: 1.3 lbs
What’s Included
- Full-length sizing die
- Bullet seating die
- Sure-Loc lock rings with wrench flats
- Elliptical expander assembly
- Allen wrench for lock rings
- Compartmentalized storage box
Frequently Asked Questions
Does the Hornady 7mm-08 die set come with a shell holder?
No, the shell holder is sold separately with this set. You'll want a #1 shell holder to run 7mm-08 Remington brass on your press. If you already reload other cartridges that share the same case head, there's a good chance you've got one on hand.
Will these dies fit my reloading press?
Yes. These dies use the industry-standard 7/8-14 thread, so they thread into virtually any single-stage, turret, or progressive press on the market. If your press accepts standard rifle dies, you're set.
What's the difference between this Series I set and a Match Grade set?
The Series I Custom-Grade set uses a fixed-dimension full-length sizing die, while Match Grade sets accept interchangeable neck bushings for fine-tuning neck tension. For hunting loads and general accuracy work in the 7mm-08, the Series I set gets the job done without the extra cost. Stepping up to Match Grade mainly benefits precision and competition reloaders who want to control neck sizing to the thousandth.
Can the seating die crimp cases?
The standard seating die in this set is set up primarily for seating bullets to a consistent depth with its in-line alignment system. For most 7mm-08 hunting and target loads, a light crimp isn't necessary since bolt-action rifles feed smoothly without it. If you want a dedicated crimp, Hornady offers separate crimp dies for the caliber.




Reviews
There are no reviews yet.