Description
If you're loading the heavy 30 caliber A-Tip Match bullets, this is the one part Hornady says you shouldn't skip. The A-Tip's aluminum nose is long and slender, which means it tends to bottom out inside a standard seating stem before the stem ever makes contact with the ogive. When that happens, you end up pushing on the tip instead of the shoulder of the bullet, and that's where runout and deformation creep in. This stem is cut to the exact profile of the 230 and 250 grain .308 A-Tip so pressure stays where it belongs.
Why the A-Tip Stem Exists
The A-Tip earns its reputation from a precision-machined aluminum tip that's longer than any polymer tip and holds tighter tolerances, which helps push the center of gravity rearward for better in-flight stability. All that careful engineering goes out the window if the tip gets dinged during seating. Because the stem is machined to cradle the bullet around the ogive rather than the point, you get repeatable seating depth and keep that aluminum tip pristine. Reloaders running these have noted the stem seats the 230 grain without leaving a ring on the tip, which is exactly the result you're after.
Fitment for Your Hornady Custom Grade Die
This stem is built specifically for Hornady Custom Grade seating dies and is not compatible with dies from other makers. It's a straightforward swap into your existing Hornady .308 seating die, so there's no need to buy a whole new die setup just to run A-Tips. One stem covers both the 230 and 250 grain weights.
Who Gets the Most Out of This Stem
Long-range target work, PRS-style competition, and anyone chasing single-digit seating depth consistency with the heavy .308 A-Tips. If you've invested in these high-BC bullets, matching them with the correct stem is the cheapest insurance you can buy for keeping your loads consistent round after round.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 397140
- UPC: 090255971408
- Model: A-Tip Match
- Caliber: 30 Cal (.308)
- Bullet Weights: 230 gr / 250 gr
- Bullet Diameter: 0.308 in
- Compatible With: Hornady Custom Grade Dies
- Component Type: Seating Stem
- Finish: Silver
- Quantity: 1
- Length: 3.65 in
What’s Included
- 1 Hornady A-Tip Match seating stem (30 Cal .308, 230/250 gr)
Frequently Asked Questions
Will this A-Tip seating stem fit my existing seating die?
It's made specifically for Hornady Custom Grade seating dies and drops right in as a replacement stem. It is not compatible with dies from other manufacturers, so you'll want to confirm you're running a Hornady Custom Grade .308 seating die before ordering.
Does one stem cover both the 230 and 250 grain A-Tip bullets?
Yes. This single stem is profiled to seat both the 230 grain and 250 grain 30 caliber .308 A-Tip Match bullets, so you don't need a separate stem for each weight.
Why do I need a special stem just for A-Tip bullets?
The A-Tip's aluminum tip is long and slender, so it tends to bottom out inside a standard seating stem and gets seated by pressure on the tip instead of the ogive. That can deform the tip and hurt consistency. This stem is machined to the A-Tip's profile so it contacts the bullet correctly and keeps the tip undamaged.
Can I use this stem with regular ELD or SST bullets?
It's cut to the specific profile of the heavy 30 caliber A-Tip bullets, so it's meant for those projectiles. For other bullet styles like ELD Match or ELD-X, Hornady offers stems matched to those profiles instead.





Reviews
There are no reviews yet.