Description
Hornady's A-TIP Match bullets use a long, precision-machined aluminum tip that sits differently in a die than a standard spitzer or VLD projectile. A regular seating stem tends to bottom out on that slender tip or make contact in the wrong spot, which can mar the bullet and throw off your seating depth. This 6mm stem solves that by matching the exact nose profile of the 110gr A-TIP, so the stem contacts the ogive where it should and leaves the tip untouched.
What the 6mm A-TIP Seating Stem Does
The A-TIP line was built around drag uniformity and consistent bullet-to-bullet ballistic coefficients, and the longer aluminum tip is a big part of that. Getting those gains on the reloading bench means seating the bullet without distorting the nose. This stem is cut to cradle the A-TIP profile, so you get clean, repeatable seating that protects the aluminum tip and keeps your runout in check.
Fitting the 397139 Stem to Your Die
Swapping it in is about as simple as reloading tasks get. You pull the standard seating stem out of your Hornady Custom Grade New Dimension Seating die and thread this one in its place. No extra tools, no fuss, and you're ready to run A-TIPs through the same die you already own. Keep in mind this stem is machined specifically for the 6mm .243 110gr A-TIP and is not cross-compatible with dies from other manufacturers.
Why Precision Loaders Reach for the A-TIP Stem
If you've invested in A-TIP Match bullets for long-range or competition work, the matched stem is the small piece that lets the bullet perform the way it was designed to. It's steel construction, made in the USA, and backed by Hornady's lifetime warranty. For anyone chasing tight groups at distance with the 6mm A-TIP, this is the correct tool for the job.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 397139
- UPC: 090255971392
- Caliber: 6mm (.243)
- Bullet Diameter: 0.243"
- Bullet Weight: 110 grain
- Series: A-TIP Match
- Product Type: Seating Stem
- Construction: Steel
- Fits: Hornady Custom Grade New Dimension Seating Dies
- Length: 3.5"
- Country of Origin: United States
- Warranty: Hornady No-Risk Lifetime Warranty
What’s Included
- One Hornady 6mm 110gr A-TIP Match seating stem (part #397139)
Frequently Asked Questions
What dies does the 6mm A-TIP seating stem fit?
It's designed to fit Hornady Custom Grade New Dimension Seating dies. You remove the standard stem that came in your die and install this one in its place. It is not compatible with seating dies from other manufacturers.
Do I really need a special stem to seat 6mm A-TIP bullets?
For best results, yes. The A-TIP uses a long, slender aluminum tip that tends to bottom out or make contact in the wrong place on standard seating stems, even ones made for VLD bullets. This stem is machined to the A-TIP profile so it contacts the ogive and seats the bullet without deforming the tip.
Which bullet does the 397139 stem work with?
This stem is matched to the Hornady 6mm .243 caliber 110 grain A-TIP Match bullet. The profile is caliber and weight specific, so it's cut for that exact projectile rather than being a universal fit.
Is the A-TIP seating stem hard to install?
Not at all. You simply back the factory stem out of your Custom Grade seating die and thread this one in. No special tools are needed, and you can go right back to loading.




Reviews
There are no reviews yet.