Description
If you've been reloading 7mm .284 ELD-X bullets with the factory stem that came in your Hornady die, you've probably noticed the tip doesn't sit quite right in that standard cup. This stem fixes that. It's cut to match the actual contour of the ELD-X nose, so the bullet seats square and true every time instead of getting pushed off-center or marked up during the seating stroke.
Why the ELD-X Seating Stem Matters
Hornady's ELD-X bullets have a long, streamlined profile with a polymer tip, and a generic seating stem can contact the bullet in the wrong spot. This 150/162 grain stem is machined to the exact profile of those projectiles, which means it makes contact lower on the ogive where it belongs. The result is more consistent seating depth from round to round and no ring or deformation around the tip. Reloaders chasing tight groups know that seating consistency is one of the quieter variables that separates an okay load from a great one.
Fitting the Hornady 397131 Stem to Your Die
This stem is a direct replacement for the standard seating stem inside a Hornady Custom Grade seating die. Swapping it in is a simple job: back out your seating die's micrometer or stem, thread this one in, and reset your depth. It covers both the 150 grain and 162 grain ELD-X in 7mm .284, so a single stem handles two of the most popular hunting bullet weights in that caliber.
Built From Steel, Built to Last
The stem is steel construction, so it holds its machined profile load after load without wearing out or losing its shape. One important note on fit: this is made for Hornady dies only and will not work in other manufacturers' seating dies. If you're running Hornady Custom Grade gear and loading ELD-X for your 7mm, this is the piece that makes the whole process cleaner.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 397131
- UPC: 090255971316
- Caliber: 7mm (.284)
- Bullet Diameter: 0.284 in
- Bullet Weight Range: 150 / 162 Grain
- Bullet Type: ELD-X
- Material: Steel
- Quantity: 1
- Die Compatibility: Hornady Custom Grade Seating Dies
What’s Included
- 1 Hornady ELD-X 7mm .284 150/162 grain seating stem (397131)
Frequently Asked Questions
Which dies does the Hornady ELD-X seating stem fit?
This stem is designed to fit Hornady Custom Grade seating dies as a direct replacement for the standard stem. It is not compatible with seating dies from other manufacturers. If you're running a Hornady die for your 7mm, it will thread right in.
What bullet weights does this 7mm stem cover?
The 397131 stem is profiled for both 150 grain and 162 grain ELD-X bullets in 7mm .284 diameter. That covers two of the most common 7mm hunting bullet weights, so one stem handles both loads without swapping.
Why use a dedicated ELD-X seating stem instead of the factory one?
Standard seating stems have a generic cup that may not match the long, pointed ELD-X profile, which can seat the bullet off-center or mark the tip. This stem is machined to the exact ELD-X ogive contour, giving you cleaner, more consistent seating depth. For precision loads, that repeatability makes a real difference on paper.
Will this stem work with 7mm ELD Match bullets too?
The 397131 stem is cut specifically for the 150/162 grain ELD-X profile. Hornady makes separate stems profiled for ELD Match bullets, so for best results match the stem to the exact bullet you're loading. Check Hornady's seating stem chart if you're loading a different weight or bullet line.




Reviews
There are no reviews yet.