Description
If you load 6.5 PRC and want a fast way to catch a problem case before it causes a headache at the range, this is the little tool that earns its spot on the bench. The Hornady Lock-N-Load Cartridge Gauge is a simple drop-in gauge machined to SAAMI maximum chamber tolerances. Drop a resized case or a finished round in, and if it seats flush, you know it'll fit a correctly cut chamber. If it hangs up or sits proud, you've found an issue worth a second look before it becomes a stuck bolt or a failure to chamber.
What the 6.5 PRC Cartridge Gauge Checks
Because it's cut to SAAMI max dimensions, the gauge checks the full case profile, not just one measurement. It'll catch cases that are oversized at the body, swollen near the base, or carrying an overall length that runs long. It's an honest-to-goodness go/no-go reference for the whole cartridge, which makes it handy for sorting range brass, spot-checking a batch coming off a progressive, or giving your match ammo a final once-over before it goes in the box.
Why Reloaders Keep This Hornady Gauge Handy
The build is straightforward and durable: solid steel, no moving parts, nothing to calibrate. It's the kind of tool you don't think much about until it saves you from a round that wouldn't chamber. Precision shooters loading for bolt guns and anyone running a volume setup both tend to appreciate how quick it is to verify a case or loaded round at a glance.
One thing worth knowing: this is the drop-in cartridge gauge, not the Hornady headspace comparator bushing system. If you're after exact shoulder-bump measurements with a caliper, that's a different tool. This gauge is built to confirm overall fit to SAAMI spec, and it does that job cleanly and consistently.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 380721
- UPC: 090255807219
- Caliber: 6.5 PRC (.264)
- Gauge Type: Drop-in cartridge gauge
- Cut Tolerance: SAAMI maximum chamber tolerances
- Material: Steel
- Finish: Silver
- Function: Verify case and loaded cartridge fit to SAAMI chamber spec
- Shipping Weight: 0.3 lbs
What’s Included
- Hornady Lock-N-Load 6.5 PRC Cartridge Gauge
Frequently Asked Questions
What does the Hornady 6.5 PRC Cartridge Gauge actually check?
It checks whether your resized cases and loaded 6.5 PRC rounds fit within SAAMI chamber dimensions. Since the gauge is cut to SAAMI maximum tolerances, a case or cartridge that drops in flush should chamber in any correctly cut 6.5 PRC chamber. It's a fast go/no-go check that catches oversized, swollen, or long cases.
Is this the same as a Hornady headspace comparator?
No. This is a drop-in cartridge gauge that confirms overall fit to SAAMI spec, not the bushing-and-caliper headspace comparator. If you want to measure exact shoulder bump in thousandths, you'll want the Hornady Headspace Comparator kit instead. This gauge is about quick fit verification, and it's great at that.
How do I use it on the bench?
Drop your resized case or finished cartridge into the gauge and look at where it sits. If it seats flush and spins freely, you're good to go. If it stands proud or binds, that case needs another look before it heads to the chamber.
Is this gauge worth it for reloading 6.5 PRC?
If you're loading your own 6.5 PRC, a case gauge is cheap insurance against rounds that won't chamber. It's especially handy for sorting range brass, spot-checking batches off a progressive press, and giving match ammo a final once-over. There are no moving parts and nothing to calibrate, so it just works.



Reviews
There are no reviews yet.