Description
Every serious .308 reloader hits that moment of truth where you need to know if your sized brass and finished rounds will actually drop into a chamber. The Hornady Lock-N-Load 308 Win Cartridge Gauge takes the guesswork out of it. You just slip a case or loaded cartridge into the gauge and check whether the head sits flush with the back of the tool. If it's flush, you're in spec. If it stands proud or sinks too deep, you know you've got sizing or headspace to address before that round ever sees your rifle.
How the Lock-N-Load 308 Cartridge Gauge Earns Its Spot on the Bench
This gauge is machined to minimum SAAMI chamber dimensions, so anything that passes the check should feed into a correctly cut .308 or 7.62 NATO chamber without drama. It's a quick way to catch oversized, swollen, or improperly sized brass before it causes a hard bolt close or worse. One end carries a slight groove that gives you a visual reference for max and min headspace, which makes it handy for dialing in your resizing die and confirming case length off the shoulder.
Built Tough, Built Simple
Hornady cuts these from high carbon steel, so the gauge holds its dimensions through thousands of checks and won't wear out on you. There are no moving parts, no batteries, and nothing to calibrate. It lives on the bench and earns its keep whether you're loading a fresh batch or spot-checking a box of factory ammo you picked up.
If you run a .308 bolt gun or semi-auto and you reload, this is one of those cheap tools that saves you headaches down the line. It pairs naturally with your resizing and trimming setup, and it's small enough to toss in a range bag for troubleshooting at the line. Keep in mind your own rifle's chamber may run a hair more generous than the gauge, so it's always smart to confirm fit in your specific firearm too.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 380716
- Model: Lock-N-Load Cartridge Gauge
- UPC: 090255807165
- Caliber/Gauge: .308 Win / 7.62 NATO
- Material: High Carbon Steel
- Color: Silver
- Quantity: 1
- Function: Checks case and cartridge fit to SAAMI chamber dimensions
- Country of Origin: USA
What’s Included
- One Hornady Lock-N-Load .308 Win Cartridge Gauge
Frequently Asked Questions
How do I use the Lock-N-Load 308 Cartridge Gauge?
Drop a sized case or a loaded cartridge into the gauge and check whether the case head sits flush with the back of the tool. Flush means the round is within spec for a SAAMI chamber. If the head stands above or falls below, you know you need to adjust your sizing or check your headspace before loading.
Does this gauge work for both .308 Winchester and 7.62 NATO?
Yes. The .308 Win and 7.62x51mm NATO share the same external case dimensions, so this gauge checks fit for both. It's built to minimum SAAMI chamber specs so anything that passes should chamber in a correctly cut rifle.
Will it tell me if my reloads will chamber in my specific rifle?
The gauge confirms your rounds meet SAAMI minimum chamber dimensions, which is a great baseline check. That said, individual chambers can run slightly more generous than the gauge, so some rifles will accept rounds that feel a touch long in the gauge. It's always a good idea to confirm fit in your own firearm as a final step.
What is the groove on the end of the gauge for?
One end of the gauge has a slight groove that serves as a visual reference for maximum and minimum headspace. This helps you judge whether your case shoulder is set back correctly when you're tuning your resizing die.




Reviews
There are no reviews yet.