Description
If you shoot a .35 Remington, .356 Winchester, or another .358-diameter lever cartridge, the Hornady 35105 FTX bullet is one of the better upgrades you can drop into your handloads. The patented Flex Tip up front gives you the aerodynamic edge of a pointed bullet while staying completely safe to stack nose-to-primer in a tubular magazine. On impact, that soft polymer tip compresses back into the bullet and kicks off expansion right away, even at the slower velocities lever guns tend to produce at distance.
What Sets the Hornady FTX 35 Cal Apart
Traditional lever-gun bullets rely on flat or round noses, which bleed velocity fast and flatten your trajectory curve. The FTX changes that with a secant ogive profile and that elastomer tip, giving it a higher ballistic coefficient (.300 G1) than the old blunt designs. That translates to flatter shooting, more retained energy downrange, and dependable expansion out past where a flat point would run out of steam. These are the same bullets Hornady loads in their LEVERevolution line, so you're getting factory-proven performance you can tune to your own rifle.
Built to Hold Together on Game
The FTX uses a one-piece, high-antimony lead core that's mechanically locked to the jacket with Hornady's InterLock ring. Paired with a heavier jacket over the shank, that setup keeps the core and jacket working together through expansion, so you get solid weight retention and deep penetration on deer-sized and larger game.
A Few Notes for Reloaders
One thing worth knowing before you set up your dies: the .358 200-grain FTX has a longer bearing surface and seats deeper than the classic 200-grain round nose, which eats into case capacity. Because of that, use published FTX-specific load data rather than your old round-nose recipes, and watch your overall length against SAAMI specs. Seating and crimping in separate steps tends to give the cleanest results with these. The sectional density runs .223 and the diameter is a true .358 inches.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 35105
- UPC: 090255351057
- Bullet Caliber: 35 Caliber
- Bullet Diameter: .358 in
- Bullet Weight: 200 Grain
- Bullet Style: FTX (Flex Tip eXpanding), Polymer Tip
- Core Material: Lead (high antimony, one-piece)
- Jacket Material: Copper
- Cannelure: Yes
- Ballistic Coefficient (G1): .300
- Sectional Density: .223
- Quantity: 100 Per Box
What’s Included
- 100 Hornady FTX 35 Cal .358 200 gr bullets (component projectiles, not loaded ammunition)
Frequently Asked Questions
Are the Hornady FTX 35 Cal bullets safe to use in a tubular magazine?
Yes. The polymer Flex Tip is soft enough that it won't set off the primer of the round ahead of it the way a hard-pointed spitzer could. That's the whole reason Hornady developed the FTX, so you get spitzer-like aerodynamics while keeping your lever gun's tube magazine safe to load.
What cartridges can I load these .358 200-grain FTX bullets in?
They're a .358-diameter bullet designed with the .35 Remington in mind, which is the cartridge Hornady loads in their LEVERevolution ammo. Handloaders also use them in cases like the .356 Winchester. Always match the bullet to your chamber and use published data for your specific cartridge.
Can I use my regular 200-grain round nose load data with the FTX?
No, and this trips up a lot of folks. The FTX has a longer bearing surface and seats noticeably deeper than the standard 200-grain round nose, which reduces case capacity and changes pressure behavior. Use FTX-specific published load data and work up from the starting charge.
Will these bullets hold together on larger game?
They're built to. The one-piece lead core is locked to the jacket with Hornady's InterLock ring, and a heavier jacket over the shank controls expansion. That combination gives you strong weight retention and deep penetration on deer-sized and heavier-bodied animals.




Reviews
There are no reviews yet.