Description
If you've been looking for a serious hunting bullet to feed your 7.62×39, the Hornady SST in .310 diameter is about as proven as it gets. Short for Super Shock Tip, this 123 grain projectile pairs a sharp polymer tip with a secant ogive boat-tail profile, so it leaves the muzzle sleek and keeps its energy downrange. The polymer tip does double duty: it sharpens the profile for a flatter path and acts like a wedge on impact, driving back into the lead core to kick off rapid, reliable expansion. With a G1 ballistic coefficient of .295 and a sectional density of .183, it strikes a nice balance between flat trajectory and real-world terminal performance.
What Makes the SST .310 Bullet Tick
Underneath the tip you've got a classic cup-and-core build with a copper jacket and lead core, held together by Hornady's InterLock ring. That little mechanical ring locks the jacket to the core during expansion, which means better weight retention and the kind of deep, consistent penetration you want when a deer is quartering away. A cannelure is rolled into the bearing surface too, giving you a clean spot to crimp and helping keep your loads consistent round to round.
Loading the Hornady 123 gr SST for 7.62×39
This is the same bullet Hornady uses in their factory Hornady Black 7.62×39 ammo, so you already know it shoots. Reloaders running bolt guns and good AKs have had solid luck getting tight groups out of it, and plenty report sub-MOA results from accurate rifles. Keep in mind this is the .310 diameter projectile, so it's a great match for barrels cut to that spec. These come as components only and are not loaded ammunition, so you'll be seating them over your own brass, powder, and primers.
Field Performance You Can Count On
Hornady lists this one for varmints under 50 pounds and medium game in the 50 to 300 pound range, which covers whitetail, hogs, antelope, and similar-sized animals. It expands dependably at typical hunting velocities and transfers energy hard, creating a wide wound channel without coming apart. For folks who want factory-grade terminal performance from their own handloads, this is a bullet that earns its keep season after season.
Key Specifications
- Manufacturer: Hornady
- MPN: 3142
- UPC: 090255231427
- Product Line: SST (Super Shock Tip)
- Caliber: 7.62mm
- Bullet Diameter: .310"
- Bullet Weight: 123 grain
- Bullet Type: Polymer Tip Boat-Tail
- Ballistic Coefficient (G1): .295
- Sectional Density: .183
- Jacket Material: Copper
- Core Material: Lead
- Cannelure: Yes
- Application: Varmint under 50 lbs, Medium Game 50-300 lbs
- Quantity: 100 Per Box
- Lead Free: No
What’s Included
- 100 Hornady SST 7.62mm (.310) 123 grain reloading bullets
Frequently Asked Questions
What diameter are these Hornady SST 123 gr bullets?
These measure .310 inches, which is the standard spec for 7.62x39mm. Just double-check your barrel's groove diameter before loading, since some surplus-pattern barrels run closer to .311. For a true .310 bore, these are a clean match.
Are these loaded cartridges or just the bullets?
These are reloading components only, meaning the projectiles by themselves. You'll need to supply your own brass, powder, and primers to assemble finished rounds. They are not loaded ammunition.
What game is the Hornady SST 7.62mm good for?
Hornady rates this bullet for varmints under 50 pounds and medium game in the 50 to 300 pound range. That covers whitetail deer, hogs, and antelope very well. The polymer tip and InterLock ring give you reliable expansion with good weight retention at typical 7.62×39 velocities.
Is this the same bullet used in Hornady Black 7.62×39 ammo?
Yes, this is the same 123 grain SST projectile that Hornady loads in their Black line factory 7.62×39 ammunition. If you've liked how that factory load performs, you can replicate it in your own handloads. The cannelure also gives you a consistent crimp groove for repeatable results.





Reviews
There are no reviews yet.