Description
If you load the .30 Carbine, this is one of the few jacketed hollow point bullets purpose-built for the job, and reloaders have leaned on it for years to get real expansion out of that little cartridge. The Hornady XTP in .309 diameter sends a 90-grain projectile with a drawn gilding metal jacket, a swaged lead core, and the serrated profile that made the XTP line a household name among folks who roll their own.
What Makes the Hornady XTP 90gr Tick
The XTP, short for eXtreme Terminal Performance, uses precise serrations that split the bullet into symmetrical sections, weakening the jacket in a controlled way so it opens up predictably even at lower velocities. Expansion is tuned by varying jacket thickness down the length of the bullet, which is a step up from plated bullets that carry the same thickness end to end. The gilding metal jacket covers the nose so there's no exposed lead, the hollow cavity works like it should on impact, and feeding stays smooth in semi-autos. This bullet carries a .115 G1 ballistic coefficient and a .136 sectional density.
Where the .309 90gr XTP Earns Its Keep
This is a .309 diameter projectile, and its most popular home is the .30 Carbine, where reloaders pair it with powders like H110 or Win 296 to push it in the 1,800 to 2,300 fps range depending on their load workup. Folks have also run it through the 7.62×25 Tokarev, 7.63 Mauser, and even lighter .30-30 loads. It's a short, stubby bullet with a short bearing surface, so some report it does best in those shorter-cased cartridges rather than full-size .30 rifle rounds. Always start low and work up using current published load data for your specific cartridge.
Built for the Handloader
These come 100 to the box and are component bullets only, not loaded ammunition. They're a dependable pick for anyone feeding a .30 Carbine or looking for honest expansion out of a small-bore handload, backed by Hornady's reputation for consistency bullet to bullet.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 31000
- UPC: 090255310009
- Bullet Line: XTP (eXtreme Terminal Performance)
- Caliber: .30 Caliber
- Bullet Diameter: .309"
- Bullet Weight: 90 Grain
- Bullet Style: Jacketed Hollow Point (JHP)
- Jacket Material: Gilding Metal / Copper
- Core Material: Lead
- Ballistic Coefficient (G1): 0.115
- Sectional Density: 0.136
- Cannelure: No
- Lead Free: No
- Quantity: 100 Per Box
What’s Included
- 100 Hornady XTP .30 Cal .309 90gr jacketed hollow point bullets (component projectiles, not loaded ammunition)
Frequently Asked Questions
What is the Hornady 90gr XTP .309 best used for?
It's one of the few jacketed hollow point bullets well suited to reloading the .30 Carbine, which is where a lot of handloaders use it. It also works in cartridges like the 7.62×25 Tokarev and 7.63 Mauser, and some run it in lighter .30-30 loads. Because of its short bearing surface, it tends to shine in those shorter-cased rounds rather than full-power .30 rifle cartridges.
Is this loaded ammunition or just the bullets?
These are component bullets only, meaning the projectiles themselves with no case, powder, or primer. You'll need your own brass, powder, primers, and reloading gear to assemble finished rounds. Each box contains 100 bullets.
What diameter are these XTP bullets?
They measure .309 inches in diameter and weigh 90 grains. That .309 size is the standard diameter for .30 Carbine and several of the other small-bore .30 caliber cartridges reloaders use this bullet for.
Why does the XTP expand so consistently?
The XTP uses precise serrations that divide the bullet into symmetrical sections, weakening the jacket so it opens up in a controlled way even at lower velocities. The jacket thickness is also varied down the length of the bullet to tune expansion, which gives it an edge over plated bullets with uniform jacket thickness. The result is dependable, controlled expansion across a wide velocity range.





Reviews
There are no reviews yet.