Description
Hornady built the ELD Match line for one thing: putting rounds on target at extended range with repeatable results. These .30 caliber (.308 diameter) 195 grain projectiles are component bullets meant for handloaders who want to tune a precision load for competition, steel, or long-range paper punching. The headline feature is the Heat Shield tip, a polymer design that resists the aerodynamic heating that can soften and deform standard polymer tips at high velocity. That means the meplat stays consistent shot after shot, which translates directly into tighter drop and drift numbers at distance.
What Makes the 195 gr ELD Match Tick
This bullet pairs a streamlined secant ogive with an optimized boat tail and a highly concentric AMP jacket. The result is a sleek, high-BC projectile with a listed ballistic coefficient of .584 (G1) and .294 (G7), along with a sectional density of .294. A precision swaged lead core keeps weight and dimensions uniform from bullet to bullet, which is a big part of why these shoot so consistently lot to lot. Hornady measures these BCs with Doppler radar and corrects them to standard atmospheric conditions, so the numbers you dial into your ballistic app are grounded in real-world data rather than estimates.
Getting the Most Out of These .308 ELD Match Bullets
At 195 grains, this is a heavier-for-caliber .308 projectile that really earns its keep in a barrel with enough twist to stabilize it. Hornady lists a minimum recommended twist rate of 1-10 inches, so a faster or equal twist is where you'll see this bullet come alive. It's a strong match for .308 Winchester, .300 Win Mag, and other .30 caliber cartridges where shooters are reaching way out there. The secant ogive seats cleanly, and handloaders generally find these easy to work with when developing an accurate load.
This box contains 100 component bullets. Keep in mind these are projectiles only, not loaded ammunition, so you'll need your own brass, powder, and primers to build a finished round.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 30951
- UPC: 090255309515
- Product Line: ELD Match
- Caliber: .30 Cal (.308 Diameter)
- Bullet Weight: 195 Grain
- Bullet Type: Extremely Low Drag Match, Polymer Tip Boat Tail
- Jacket Material: AMP
- Core Material: Lead
- Tip Material: Heat Shield Polymer
- Ballistic Coefficient: .584 (G1) / .294 (G7)
- Sectional Density: .294
- Minimum Recommended Twist Rate: 1-10"
- Application: Target / Match
- Quantity: 100 Per Box
What’s Included
- 100 Hornady ELD Match .30 Cal (.308) 195 gr component bullets
Frequently Asked Questions
Are these Hornady ELD Match 195 gr a loaded round or just bullets?
These are component bullets only, meaning the projectiles by themselves. You'll need your own brass, powder, and primers to assemble a finished cartridge. They're intended for handloaders building precision .30 caliber loads.
What twist rate do I need to stabilize the 195 gr ELD Match?
Hornady lists a minimum recommended twist rate of 1-10 inches for this bullet. Because it's a heavier, longer .308 projectile, a 1-10 or faster barrel will stabilize it best. Slower twists may not fully stabilize a bullet this long.
What's the ballistic coefficient on the Hornady 195 gr ELD Match?
This bullet carries a ballistic coefficient of .584 (G1) and .294 (G7). Hornady verifies these figures using Doppler radar and corrects them to standard atmospheric conditions, so they're well suited for dialing in a ballistic solver at long range.
Why does the Heat Shield tip matter on the ELD Match?
The Heat Shield tip resists aerodynamic heating, which can deform standard polymer tips at high velocity. By holding its shape, it keeps the meplat consistent from shot to shot. That consistency helps maintain predictable trajectories at extended distances.





Reviews
There are no reviews yet.