Description
The Hornady AeroMatch .30 Cal 175 grain HPBT is a .308 diameter match bullet that borrows the most popular profiles and weights from across the industry and puts them under Hornady's manufacturing roof. The hollow point boat tail design carries a G1 ballistic coefficient right around 0.485, giving you the aerodynamic stability and predictable trajectory that long-range work demands. The 175 grain weight has long been a workhorse in the .308 Winchester world, and this one is set up to run in barrels with a 1:12 twist or faster.
What Makes the AeroMatch 175 gr HPBT Tick
The big story here is consistency without the hassle. These are made in small, sequentially numbered batches of 3,000 bullets, so the uniformity you count on for competition and precision loading stays locked in from the first round to the last. Because the profiles are built to mirror match bullets already on the market, you can typically keep your existing load data, die settings, and ballistic solver info in place and get right to shooting. That seamless transition is a big part of the appeal for folks who have a dialed load and just want more components to feed it.
Loading the .308 175 gr AeroMatch
This bullet shines as a volume component for the reloader who burns through projectiles. Whether you are building practice ammo for PRS and NRL Hunter season or doing load development for a .308 bolt gun, having 500 on hand means more trigger time between component orders. Real-world feedback from the field shows these can turn in tidy groups with minimal fuss once you find the node your rifle likes. As always, start low and work up using published data for your cartridge, and confirm your rifle's twist rate handles the 175 grain weight.
For target shooters, trainers, and precision reloaders who want match-grade performance in a bullet that plays nice with gear they already own, the AeroMatch 175 grain HPBT earns its spot on the bench.
Key Specifications
- Manufacturer: Hornady
- Product Line: AeroMatch
- Manufacturer Part Number: 307191
- UPC: 090255727135
- Caliber: .30 Caliber (.308)
- Bullet Diameter: 0.308 in
- Bullet Weight: 175 Grain
- Bullet Type: Hollow Point Boat Tail (HPBT)
- Ballistic Coefficient (G1): 0.485
- Recommended Twist Rate: 1:12 or faster
- Quantity: 500 Count
- Application: Target / Match
- Lead Free: No
What’s Included
- 500 Hornady AeroMatch .30 Cal (.308) 175 gr HPBT bullets
Frequently Asked Questions
What twist rate do I need for the AeroMatch 175 gr .308 bullet?
Hornady recommends a 1:12 twist or faster to properly stabilize this 175 grain projectile. A 1:12, 1:11, or 1:10 barrel will all run it fine, which covers the vast majority of .308 Winchester rifles out there. If you are unsure of your barrel's twist, check the markings or your rifle's spec sheet before loading.
Can I use my existing .308 load data with these AeroMatch bullets?
One of the main selling points of the AeroMatch line is that it mirrors popular match profiles already on the market, so in most cases you can keep your load data, die settings, and ballistic solver info unchanged. That said, different bullets and even different lots can behave slightly differently in your rifle, so it is smart to confirm your tune and watch for pressure signs as you work up. Always start low and reference published data for your cartridge.
What is the ballistic coefficient of the 175 gr AeroMatch?
This bullet carries a G1 ballistic coefficient of approximately 0.485. That gives you solid aerodynamic stability and manageable wind drift for target and match work, especially at mid to long range. Users have reported BCs trueing out close to the advertised number once they gather their own downrange data.
Is the AeroMatch 175 gr good for competition or just practice?
It works for both. The AeroMatch line is positioned as an affordable, high-volume match component, making it a popular choice for practice and training rounds as well as competition loads once you have a node dialed in. Field testing has shown these bullets capable of tight groups with minimal load development, so plenty of folks run them for serious precision work and not just plinking.





Reviews
There are no reviews yet.