Description
These are the projectiles that put the "revolution" in Hornady's LEVERevolution lineup. The 160 grain FTX in .30 caliber (.308 diameter) was engineered specifically for the .308 Marlin Express, pairing a pointed, high ballistic coefficient profile with a flexible polymer tip that compresses on impact instead of sitting rigid against the primer ahead of it. That design is what finally let lever gun owners run a tipped, aerodynamic bullet in a tubular magazine without worry. You're buying component bullets here, not loaded ammunition, so you'll be supplying your own brass, powder, and primers.
What the FTX Flex Tip Brings to the Bench
The soft tip does double duty. On the shelf it keeps a pointed bullet safe to stack nose to primer in a tube mag, and on impact it drives back into the bullet to kick off reliable expansion across a wide velocity window. Behind that tip sits a high antimony lead core mechanically locked to the jacket with Hornady's InterLock ring, which keeps the core and jacket together for solid weight retention and controlled, deep penetration on game. With a sectional density of .241 and a G1 ballistic coefficient of .395, this bullet carries energy and shoots flatter than the old flat point loads it was built to replace.
Handloading the 160 gr .308 FTX
These bullets wear a cannelure and respond best to being seated and crimped there, which matters in a tube magazine where recoil can shove bullets deeper. A couple of things worth knowing before you load: the FTX has a longer ogive than a conventional spitzer, so it seats deeper and your case capacity changes. Follow current Hornady load data for your exact cartridge and watch your overall length, since the cannelure may not line up with standard brass in every chambering. A dedicated FTX seating stem is a smart call too, since a standard plug can push on that soft tip instead of the ogive.
Where This Bullet Earns Its Keep
Hornady rates the 160 grain FTX for medium game in the 50 to 300 pound range and large game up to 1500 pounds, which covers deer, hogs, black bear, and elk-class animals within sensible lever gun distances. If you shoot a .308 Marlin Express and want factory-level LEVERevolution performance from your own loads, this is the bullet to build around.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 30396
- UPC: 090255303964
- Product Line: FTX (Flex Tip eXpanding)
- Bullet Caliber: .30 Caliber
- Bullet Diameter: .308"
- Designed Cartridge: .308 Marlin Express
- Bullet Weight: 160 grain
- Bullet Style: Polymer Flex Tip
- Jacket Material: Copper
- Core Material: Lead (high antimony)
- Cannelure: Yes
- Sectional Density: .241
- Ballistic Coefficient (G1): .395
- Quantity: 100 Per Box
- Product Type: Reloading Bullets (component, not loaded ammo)
What’s Included
- 100 Hornady 160 gr .30 cal (.308) FTX bullets
Frequently Asked Questions
Are these loaded rounds or just the bullets?
These are component bullets only, not loaded ammunition. You get 100 projectiles to handload with your own brass, powder, and primers. They're meant for reloaders building their own cartridges.
What cartridge were these Hornady 160 gr FTX bullets designed for?
Hornady built this .308 diameter 160 grain FTX around the .308 Marlin Express, the cartridge that anchors their LEVERevolution lineup. The flexible tip is what makes a pointed, aerodynamic bullet safe to stack in a tubular magazine. Folks do load them in other .30 caliber cases, but the cannelure position and long ogive are set up with the .308 Marlin Express in mind, so always check current Hornady data for your chambering.
Is the Flex Tip safe in a tubular magazine?
Yes, that's the whole point of the FTX design. The soft polymer tip compresses rather than acting like a hard point against the primer of the round ahead of it under recoil. That lets you run a tipped, high BC bullet in a lever gun's tube mag that older pointed bullets couldn't safely do.
Any tips for seating the 160 gr FTX without damaging the tip?
Use an FTX-specific seating stem if you can, since a standard plug tends to bear on the soft tip instead of the ogive and can dent it. Seat to the cannelure and apply a crimp there to keep bullets from setting back in a tube magazine. The FTX has a longer ogive than a typical spitzer, so it seats deeper and reduces case capacity, which is why you should stick to current Hornady load data and watch your overall length.




Reviews
There are no reviews yet.