Description
The Hornady ELD Match 7mm (.284) 162 grain bullet is one of the most popular projectiles in the precision reloading world, and for good reason. It pairs a high ballistic coefficient with the sort of consistency that keeps groups tight at distance. With a G1 BC of .670, a G7 BC of .338, and a sectional density of .287, this 162 grain bullet carries velocity and bucks wind better than most in its class, which is exactly what you want when the target is a long way off.
What Makes the ELD Match 162 Grain Tick
The headline feature here is the Heat Shield tip. Standard polymer tips can soften and deform from the heat of flight, which throws off the meplat and hurts consistency. Hornady's Heat Shield tip is built to resist that aerodynamic heating and hold its shape all the way to the target. Add in a streamlined secant ogive, an optimized boat-tail, and highly concentric AMP jackets wrapped around a lead core, and you get a bullet engineered for repeatable accuracy from one round to the next.
Loading the 7mm ELD Match for Long Range
These are reloading components, not loaded ammunition, so you'll be seating them in your own brass. The .284 diameter 162 grain works across popular 7mm chamberings like the 7mm Rem Mag, 28 Nosler, 7mm-08, and the 7mm PRC. Hornady lists a minimum recommended twist rate of 1-in-9.5 inches to stabilize this bullet properly, so check your barrel before you commit a load to it. One nice touch for handloaders chasing precision: the BCs are measured with Doppler radar and corrected to standard atmospheric conditions, so the numbers you plug into your ballistic solver are the real deal rather than a marketing estimate.
Who Reaches for These
This is a target and match bullet first and foremost. Precision rifle competitors, long-range steel shooters, and handloaders who want tight, predictable groups will feel right at home with the 162 grain ELD Match. If your build has the twist to run it, it's a hard bullet to beat for the money.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 28403
- UPC: 090255284034
- Product Line: ELD Match
- Bullet Caliber: 7mm
- Bullet Diameter: .284"
- Bullet Weight: 162 Grain
- Bullet Type: Extremely Low Drag-Match (ELD-M) Boat Tail
- Tip Material: Heat Shield Polymer
- Jacket Material: AMP
- Core Material: Lead
- Ballistic Coefficient (G1): .670
- Ballistic Coefficient (G7): .338
- Sectional Density: .287
- Minimum Recommended Twist Rate: 1-in-9.5"
- Cannelure: No
- Quantity: 100 Per Box
- Application: Target / Match
What’s Included
- 100 Hornady ELD Match 7mm (.284) 162 grain bullets
Frequently Asked Questions
What twist rate do I need to stabilize the ELD Match 162 grain 7mm?
Hornady lists a minimum recommended twist rate of 1-in-9.5 inches for this 162 grain bullet. A faster twist like 1-in-8 will stabilize it just fine too. If your barrel is slower than 1-in-9.5, you may see inconsistent accuracy, so it's worth confirming your twist before loading these.
Are these Hornady ELD Match bullets loaded ammunition?
No, these are reloading components only. You get the projectiles themselves, which you'll seat into your own prepared brass with your preferred powder and primer. They are not loaded cartridges and cannot be fired as-is.
What cartridges can I load the 7mm 162 grain ELD Match in?
Any 7mm (.284 diameter) cartridge with enough case capacity and twist to run it. That includes popular options like the 7mm Rem Mag, 7mm PRC, 28 Nosler, 280 Ackley Improved, and 7mm-08. Just make sure your barrel meets the 1-in-9.5 minimum twist.
What makes the Heat Shield tip better than a standard hollow point?
The Heat Shield tip resists the aerodynamic heating that can deform ordinary polymer tips in flight, so the meplat stays uniform from the muzzle to the target. That consistency is a big part of why the ELD Match holds such a high ballistic coefficient. Hornady reports it outperforms traditional boat-tail hollow point match bullets in this regard.



Reviews
There are no reviews yet.