Description
The Hornady ELD-X 7mm (.284) 162gr is a component hunting bullet built for handloaders who want one projectile that handles everything from brush-busting shots to long pokes across a canyon. It carries a G1 ballistic coefficient of around .630 and a sectional density of .287, which means it bucks wind well and retains velocity deep into its flight. For a 162 grain 7mm pill, that puts it near the top of its class for aerodynamics.
What Makes the ELD-X 7mm 162gr Tick
The standout feature is the Heat Shield polymer tip. Hornady found that conventional tip materials actually soften and deform from aerodynamic heating on fast, high-BC bullets, which quietly chips away at accuracy past 400 yards. The Heat Shield tip resists that heat and holds its meplat, so the BC stays consistent over the whole trajectory. Pair that with a streamlined secant ogive, an optimized boat tail, and Hornady's concentric AMP jacket, and you get a bullet that shoots like a match bullet but hits like a hunting bullet.
Terminal Performance You Can Count On
This is where the ELD-X earns its keep in the field. On conventional 0 to 400 yard impacts, the bullet expands throughout its penetration path, with the thick jacket shank and high InterLock ring holding the core and jacket together for 50 to 60 percent weight retention. Stretch the shot past 400 yards and the slower impact velocity lets the Heat Shield tip drive back into the bullet to kick off expansion, producing a big mushroom and 85 to 90 percent retained weight for deep penetration. It's rated for medium game in the 50 to 300 pound range and large game up to 1,500 pounds.
Loading the ELD-X 7mm 162gr
These measure .284 diameter and run best out of a 1:9.5 inch twist or faster. They're sold as component bullets only, so you'll be supplying your own brass, powder, and primers. If you'd rather skip reloading, Hornady loads this same projectile in their factory Precision Hunter line.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 2840
- UPC: 090255228403
- Bullet Line: ELD-X (Extremely Low Drag – eXpanding)
- Caliber: 7mm
- Bullet Diameter: .284"
- Bullet Weight: 162 Grain
- Bullet Style: Polymer Tip Boat Tail
- Jacket: AMP (Advanced Manufacturing Process)
- Core Material: Lead
- Sectional Density: 0.287
- Ballistic Coefficient (G1): 0.630
- Ballistic Coefficient (G7): 0.315
- Recommended Twist Rate: 1:9.5"
- Game Application: Medium (50-300 lb) and Large Game (300-1500 lb)
- Quantity: 100 per Box
What’s Included
- 100 Hornady ELD-X 7mm (.284) 162gr component bullets
Frequently Asked Questions
What twist rate do the Hornady ELD-X 7mm 162gr bullets need?
Hornady recommends a 1:9.5 inch twist or faster to stabilize this 162 grain bullet. Most modern 7mm hunting rifles chambered for cartridges like 7mm Rem Mag, 28 Nosler, and 7mm PRC will run this just fine. If your barrel has a slower twist, you may see less consistent accuracy.
Are these loaded ammunition or just the bullets?
These are component bullets only, meant for handloading. You'll need to supply your own brass, powder, and primers to assemble finished cartridges. If you want factory ammo with this same projectile, Hornady loads it in their Precision Hunter line.
How does the ELD-X 7mm 162gr perform on game?
It's a true all-range hunting bullet. On closer, higher-velocity hits it expands through the penetration path and holds 50 to 60 percent of its weight thanks to the InterLock ring. On longer shots past 400 yards, the Heat Shield tip drives back to start expansion and retains 85 to 90 percent weight for deep penetration and a big wound channel.
What's the ballistic coefficient on the 162gr ELD-X?
It carries a G1 BC right around .630 and a G7 BC near .315, which is among the highest in its class for a 7mm 162 grain bullet. That high BC means it resists wind drift and holds velocity well at extended range. Sectional density comes in at .287.



Reviews
There are no reviews yet.