Description
The Hornady A-Tip Match in 6.5mm (.264) 135 grain is one of the most refined match projectiles the Hornady Ballistic Development Group has put out, and it shows every time you break the shot. Instead of the usual polymer tip, this bullet runs a precision machined aluminum tip that sits longer than a standard plastic point. That extra length pushes the center of gravity forward, which helps the bullet settle quickly and track true through its full flight. If you have been fighting vertical dispersion at distance, this is the kind of bullet that smooths things out.
What Sets the A-Tip Match 135 gr Apart
The magic here is consistency. Hornady pairs a flat meplat tip design with an optimized boat tail and a long bearing surface tuned specifically for the 6.5mm, and the result is drag that behaves the same bullet to bullet. The AMP jacket is drawn for tight uniformity and concentricity, so you get less wobble and tighter groups downrange. Doppler radar verified ballistic coefficients come in at .637 G1 and .321 G7, with a sectional density of .277. Those numbers hold up well in the wind and make the bullet forgiving of small changes in twist, seating depth, and muzzle velocity.
Loading the 6.5mm A-Tip Match in Your Rifle
These drop right into popular 6.5 cartridges like the 6.5 Creedmoor and 6.5 PRC, and they want a 1:8.5 inch twist or faster to stabilize properly. One thing worth knowing before you sit down at the press: the A-Tip line is designed around a dedicated A-Tip seating stem for best results, since the aluminum tip has a different profile than a standard polymer point. The 500 count box is the bulk option serious competitors and high-volume load developers reach for, giving you plenty of components to work up a load and still have a healthy supply for match season.
Key Specifications
- Manufacturer: Hornady
- Product Line: A-Tip Match
- Caliber: 6.5mm (.264)
- Bullet Diameter: 0.264 in
- Bullet Weight: 135 Grain
- Bullet Style: Aluminum Tip Boat Tail
- G1 Ballistic Coefficient: 0.637
- G7 Ballistic Coefficient: 0.321
- Sectional Density: 0.277
- Overall Length: 1.383 in
- Recommended Twist Rate: 1:8.5 in or faster
- Application: Target/Match
- Quantity: 500 per box
- Manufacturer Part Number: 261792
- UPC: 090255727241
What’s Included
- 500 Hornady A-Tip Match 6.5mm (.264) 135 grain bullets
Frequently Asked Questions
Do the A-Tip Match 6.5mm bullets require a special seating stem?
Yes, Hornady recommends using a dedicated A-Tip seating stem for proper, consistent seating. The aluminum tip has a different profile than a standard polymer tip, so the correct stem makes contact in the right spot and protects your seating consistency. It is worth grabbing one if you do not already have it before you start loading these.
What twist rate do I need to stabilize the 135 grain A-Tip Match?
Hornady lists a 1:8.5 inch twist or faster as the minimum to stabilize this 135 grain bullet. Most modern 6.5 Creedmoor and 6.5 PRC barrels come in a 1:8 twist, so they handle this bullet without any issue. If you are running a slower twist, check your barrel spec before loading.
What cartridges work with the 6.5mm A-Tip Match 135 gr?
This .264 diameter bullet is a great fit for popular 6.5mm cartridges including the 6.5 Creedmoor and 6.5 PRC. Any 6.5mm chambering with the right twist rate and case capacity to run a 135 grain projectile will work. It is built with competition and long-range target work in mind.
Why choose the A-Tip Match over an ELD Match bullet?
The A-Tip uses a precision machined aluminum tip that is longer than a polymer point, which shifts the center of gravity forward and sharpens in-flight stability. The flat meplat tip design keeps drag uniform bullet to bullet for less vertical dispersion at distance. It is aimed at shooters chasing the last bit of consistency for serious precision work.





Reviews
There are no reviews yet.