Description
The 6.5mm 135gr A-TIP Match is Hornady's answer for handloaders who chase small groups at distance. Built by the Hornady Ballistic Development Group, these bullets combine a precision-machined aluminum tip with the refined AMP (Advanced Manufacturing Process) jacket to deliver the kind of uniformity that shows up on paper at long range. The aluminum tip runs longer than a polymer tip, which shifts the center of gravity forward and helps stabilize the bullet in flight. It also won't soften or deform from heat the way some polymer tips can.
What Sets the 135gr A-TIP Match Apart
There's a lot of engineering packed into this projectile. You get a carefully blended ogive, tip length, bearing surface, and an optimized boat tail matched to the 6.5mm caliber. The result is a high ballistic coefficient, listed at .637 (G1) and .321 (G7), with a sectional density of .277. These numbers are Doppler radar verified, so the BC you're loading for is the BC you're getting. The flat meplat on the tip is designed to increase drag uniformity bullet to bullet, which translates to less vertical dispersion when you stretch things out past 600 yards.
Loading the 6.5mm A-TIP Match Bullets
A couple of practical notes for the bench. These are a long bullet with a lot of bearing surface, so Hornady recommends a minimum 1:8.5" twist rate to stabilize them properly. If your 6.5 Creedmoor, 6.5 PRC, or .260 barrel is cut at that twist or faster, you're in good shape. Keep in mind this is a component projectile, not loaded ammunition, and it calls for the dedicated A-TIP seating stem for clean, consistent seating. The bullets ship sequentially off the press for lot-to-lot consistency, and each box includes a polishing bag since they aren't bulk washed after manufacturing.
For precision target work, F-Class, PRS matches, or any load development where consistency is the whole game, these are about as refined as factory component bullets get.
Key Specifications
- Manufacturer: Hornady
- MPN: 26179
- UPC: 090255261790
- Product Line: A-TIP Match
- Bullet Caliber: 6.5mm
- Bullet Diameter: .264"
- Weight: 135 Grain
- Ballistic Coefficient: .637 (G1) / .321 (G7)
- Sectional Density: .277
- Minimum Recommended Twist Rate: 1:8.5"
- Tip Material: Aluminum
- Jacket Material: Copper
- Core Material: Lead
- Application: Target / Match
- Overall Length: 7.45"
- Quantity: 100 Per Box
What’s Included
- 100 Hornady 6.5mm (.264) 135gr A-TIP Match bullets
- Polishing bag for prepping bullets before loading
Frequently Asked Questions
What twist rate do the 6.5mm 135gr A-TIP Match bullets need?
Hornady recommends a minimum 1:8.5" twist rate to properly stabilize these bullets. They're long with a lot of bearing surface, so a faster twist like 1:8" or 1:7.5" works great too. If your barrel is slower than 1:8.5", you may see accuracy fall off.
Do I need a special seating stem for the A-TIP Match bullets?
Yes. Because of the aluminum tip's shape, Hornady calls for the dedicated A-TIP seating stem for optimal, consistent seating. Using a standard stem can mar the tip or give you inconsistent seating depth. The A-TIP stems are sold separately through Hornady.
Are these loaded cartridges or just the bullets?
These are component projectiles only, meant for handloading. You'll need your own cases, powder, and primers to assemble finished ammunition. They're built for reloaders doing precision load development.
What's the deal with the polishing bag in the box?
A-TIP Match bullets aren't bulk washed after manufacturing to keep handling to a minimum, which helps consistency. The included polishing bag lets you clean them up and prep them for loading. It's a quick step that gets them ready for the press.




Reviews
There are no reviews yet.