Description
Hornady built the ELD-VT to settle an old argument between target shooters and varmint hunters. It pairs the aerodynamics of a low-drag match bullet with the lighter weight and higher velocity you want when you're reaching out to small game. The result is a 6mm (.243) 80-grain projectile that prints tight on paper and comes apart dramatically on impact, so you don't have to keep two different boxes on the bench for two different jobs.
What Makes the ELD-VT Tick
The heart of this bullet is Hornady's Heat Shield tip, a polymer tip that resists the aerodynamic heating that can soften lesser tips in flight. That means the nose holds its shape and the bullet keeps its low drag all the way to the target. Behind the tip, a long and sleek match profile with a reduced core-to-bullet length ratio pushes the center of gravity rearward, which helps maximize muzzle velocity and sharpens aerodynamic performance. The G1 ballistic coefficient sits at .410 with a G7 of .206, and sectional density runs .194, solid numbers for an 80-grain pill in this caliber.
Terminal Performance You Can Count On
When the ELD-VT connects, the polymer tip drives rearward through the large air gap and into the core, triggering rapid and dramatic fragmentation even at lower velocities. That's exactly what you want on prairie dogs, ground squirrels, and other varmints where a flat-shooting, hard-hitting bullet earns its keep. The Advanced Manufacturing Process (AMP) jackets keep concentricity and wall thickness consistent from one bullet to the next, which is the quiet secret behind repeatable accuracy.
Loading the 6mm 80gr ELD-VT
These are reloading components, not loaded ammunition, so you'll be seating them in your own brass. They work well in 6mm Creedmoor, 6mm ARC, .243 Winchester, and other .243-bore cartridges running a twist rate fast enough to stabilize an 80-grain bullet. If you handload for a 6mm precision rig or a dedicated varmint gun, this is a versatile component worth working into your load data.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 24372
- UPC: 090255243727
- Caliber: 6mm (.243)
- Bullet Diameter: .243 in
- Bullet Weight: 80 Grain
- Bullet Type: ELD-VT (polymer tipped)
- Ballistic Coefficient (G1): .410
- Ballistic Coefficient (G7): .206
- Sectional Density: .194
- Application: Varmint / Target / Match
- Quantity: 100 per box
- Bullet Length: 4.15 in
What’s Included
- 100 Hornady 6mm (.243) 80gr ELD-VT bullets (reloading components, box of 100)
Frequently Asked Questions
What is the ELD-VT designed for?
The ELD-VT is a dual-purpose bullet that blends low-drag match aerodynamics with the light weight and speed of a varmint bullet. That makes it right at home punching paper in long-range competition and dropping prairie dogs and other small varmints in the field. Hornady built it so you get match-grade accuracy and rapid terminal fragmentation from the same box.
Is this loaded ammunition or a reloading component?
These are reloading bullets only, not loaded ammunition. You'll seat them in your own prepared and primed brass with your preferred powder charge. They're sold 100 bullets per box.
What cartridges and twist rate work with the 80gr ELD-VT?
Any .243-bore cartridge can use these, including 6mm Creedmoor, 6mm ARC, and .243 Winchester. For an 80-grain bullet you'll want a barrel with a twist rate fast enough to stabilize it, so check your rifle's twist against Hornady's load data before working up a load. Most modern 6mm precision barrels handle this weight without trouble.
What makes the Heat Shield tip different?
The Heat Shield tip is a polymer tip engineered to resist aerodynamic heating, which can deform softer tips during flight. By holding its shape, the tip keeps the bullet's low-drag profile intact all the way to the target for more consistent long-range flight. On impact it drives rearward into the core to kick off rapid fragmentation.





Reviews
There are no reviews yet.