Description
Hornady's V-MAX line has earned its spot as one of the most trusted varmint bullets on the bench, and this 6mm (.243) 75 grain boat tail version is a favorite among handloaders running .243 Winchester, 6mm Remington, 6mm Creedmoor, and similar cartridges. Each bullet combines a sharp polymer tip, a swaged lead core, and a copper jacket into a package that flies flat and opens up fast. This is a component bullet for reloading, not loaded ammunition, so you'll be seating these yourself.
What Sets the 6mm 75 gr V-MAX Apart
The polymer tip does more than look the part. It raises the ballistic coefficient to .330 (G1) for faster downrange velocity and a flatter arc, and on impact it drives back into the core like a wedge to kick off rapid, dramatic expansion. That hollow cavity sitting beneath the tip is the real secret behind the explosive terminal performance these bullets are known for, and they'll open up reliably even at lower velocities down around 1600 fps.
Boat Tail Design Built for Accuracy
The boat tail base and streamlined secant ogive work together to cut drag and keep the bullet stable in flight, which pays off when you're reaching out across a field or pasture. The match grade jacket is concentric and built to hold together through the fast twist rates found in modern varmint rifles, so you get consistency shot after shot. With a .181 sectional density and 75 grains of weight, this bullet threads the needle between flat shooting and enough mass to buck wind.
Dialing In Your 6mm Loads
Reloaders like these because they tune up nicely in a wide range of 6mm cases and reward careful load development with tight groups. Whether you're thinning out prairie dogs, coyotes, or ground squirrels, the 75 grain V-MAX gives you the flat trajectory and violent expansion that make varmint work satisfying. Pick up a box, work up a charge, and these will earn a permanent spot in your reloading rotation.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 22420
- UPC: 090255275025
- Caliber: 6mm (.243")
- Bullet Diameter: .243"
- Bullet Weight: 75 Grain
- Bullet Style: V-MAX Boat Tail
- Bullet Tip Material: Polymer
- Jacket Material: Copper
- Core Material: Lead
- Ballistic Coefficient (G1): .330
- Sectional Density: .181
- Minimum Expansion Velocity: 1600 fps
- Application: Varmint
- Quantity: 100 Per Box
What’s Included
- 100 Hornady V-MAX 6mm (.243) 75 gr boat tail bullets
Frequently Asked Questions
Are these Hornady V-MAX 6mm bullets loaded ammunition?
No, these are component bullets intended for handloading. You'll need your own brass, powder, and primers to assemble finished cartridges. They work in 6mm cases like .243 Winchester, 6mm Remington, and 6mm Creedmoor.
What is the ballistic coefficient of the 75 grain V-MAX?
This bullet carries a G1 ballistic coefficient of .330 with a sectional density of .181. The polymer tip and boat tail design are what drive that number up, giving you flatter trajectories and better retained velocity downrange.
What are these 6mm V-MAX bullets best used for?
The V-MAX is built as a dedicated varmint bullet, so it shines on prairie dogs, coyotes, ground squirrels, and similar game. The polymer tip initiates fast, dramatic expansion on impact, and it still opens reliably at lower velocities down around 1600 fps.
Will the 75 grain V-MAX stabilize in my .243 rifle?
Most .243 and 6mm rifles with common twist rates handle the 75 grain V-MAX just fine. The boat tail and secant ogive help keep it stable in flight, though it's always smart to confirm your barrel's twist rate when working up loads for best accuracy.




Reviews
There are no reviews yet.