Description
Chamfering the inside of a freshly trimmed case mouth is one of those small steps that makes a big difference at the bench. The Hornady 6-Blade Inside Diameter Chamfer Tool eases that interior edge so bullets slide in straight and seat smoothly, cutting down on the shaving and gouging you get when you try to stuff a projectile into a raw, square-cut neck. Six cutting blades do the work instead of the usual one or two, which spreads the load and leaves a cleaner, more even chamfer with less effort.
What the Hornady 6-Blade Chamfer Tool Does at the Bench
This one is built for inside diameter chamfering only, and it covers a wide span of brass from .17 all the way up to .45 caliber. That range makes it a practical single tool for a mixed reloading setup, whether you're prepping varmint rounds, standard rifle brass, or larger straight-wall cases. The blades remove burrs left behind from trimming and give the case mouth a gentle taper, which translates to consistent seating depth and less chance of damaging bullet jackets or deforming soft lead.
Build and Feel of the 050172 Chamfer Tool
Hornady made this one out of hardened steel so the cutting edges hold up over long reloading sessions and big batches of brass. The center section is knurled, giving you a secure, comfortable grip when you're spinning it by hand through a pile of cases. It's compact and straightforward, nothing fancy, just a tool that does its job and keeps doing it.
Fitting the 6-Blade Inside Chamfer Tool to Your Setup
The tool uses an 8-32 thread and is compatible with Hornady's Lock-N-Load Quick Change Hand Tool, so you can swap it in and out quickly. Beyond the hand tool, it threads onto the Universal Handle, the Power Case Prep Center, and the Case Prep Trio, which means if you already run a Hornady prep station you can mount this blade and let the machine spin through your brass. For anyone looking to tighten up seating consistency without overthinking it, this is a simple, dependable piece to have in the kit.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 050172
- UPC: 090255501728
- Product Type: Inside Diameter Chamfer Tool
- Blade Count: 6
- Caliber Range: .17 to .45 Cal
- Material: Hardened Steel
- Thread Size: 8-32
- Grip: Knurled Center Section
- Application: Inside Diameter Chamfering
- Compatibility: Lock-N-Load Quick Change Hand Tool, Universal Handle, Power Case Prep Center, Case Prep Trio
- Quantity: 1
What’s Included
- Hornady 6-Blade Inside Diameter Chamfer Tool (050172)
Frequently Asked Questions
What calibers does the Hornady 6-Blade Chamfer Tool work with?
This tool is designed to chamfer the inside of case mouths from .17 all the way up to .45 caliber. That broad span covers most common rifle and straight-wall brass, so it handles a mixed reloading bench well. You get one tool instead of needing separate chamfers for different case sizes.
Does the 6-Blade Inside Diameter Chamfer Tool fit Hornady's powered prep stations?
Yes. It uses an 8-32 thread and mounts on the Universal Handle, Power Case Prep Center, and Case Prep Trio, plus it works with the Lock-N-Load Quick Change Hand Tool. If you already run a Hornady prep setup, you can thread this blade in and let the machine spin your brass.
What's the advantage of six blades over a standard chamfer tool?
The six cutting edges share the cutting work, which gives you a cleaner and more even chamfer with less hand effort. It removes trimming burrs from the case mouth and leaves a smooth taper, so bullets seat without shaving or getting scratched. That consistency helps keep your seating depth uniform across a batch.
Is the Hornady chamfer tool only for inside chamfering?
Correct, this specific tool handles inside diameter chamfering of the case mouth. If you also want to deburr the outside edge, Hornady makes separate deburring tools and combination chamfer/deburr blades for that job. This one focuses on the interior edge to ease bullet seating.



Reviews
There are no reviews yet.