Description
If you run a Hornady Cam-Lock Trimmer, this little head is one of the smartest add-ons you can keep on the bench. It drops into place where the standard cutter mounts and turns your trimmer into a chamfer and deburring station in about thirty seconds. Instead of trimming, then grabbing a separate hand tool to clean up the case mouth, you let the trimmer do the heavy lifting. The hardened steel construction holds its edge through long reloading sessions, and the matte silver finish keeps it looking clean batch after batch.
The real draw here is consistency. Because it works off the same cam lock case positioning as your trimmer, the chamfers and deburrs come out square with the case mouth every single time. That matters more than most folks give it credit for. A clean, square case mouth means bullets seat smoother, you shave off less jacket material, and your rounds feed and chamber the way they should. It handles both the inside chamfer and the outside deburr, so you get the full case-mouth cleanup in one setup.
What the Cam Lock Trimmer Deburring Tool Brings to the Bench
This is a multi-caliber piece, covering roughly .17 all the way up to .45. Whether you're prepping precision rifle brass or running a pile of pistol cases for range time, it works across your lineup without swapping heads for every cartridge. For high-volume reloaders, that versatility is the whole point.
Getting the Most From Your Hornady Deburring Tool
Using it is about as simple as it gets. Pull the standard cutter, install this head in its place, lock your case in the shell holder, and give it a few turns. Cases come out smooth inside and out, ready for the next step. Keep in mind this is an accessory built specifically for the Hornady Cam-Lock Trimmer system, so you'll want that trimmer already in your setup to put it to work. If you've been doing your chamfer and deburr by hand, this is the kind of upgrade that quietly speeds up your whole routine.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 050147
- UPC: 090255501476
- Model: Cam Lock Trimmer
- Caliber/Gauge: Multi-Caliber (.17 to .45)
- Function: Chamfer and Deburr Case Mouths
- Material: Hardened Steel
- Finish: Matte Silver
- Compatible With: Hornady Cam-Lock Trimmer System
- Series: Deburring Tool
- Shipping Weight: 0.15 lbs
What’s Included
- Hornady Cam Lock Trimmer Deburring Tool head (1)
Frequently Asked Questions
Does the Cam Lock Trimmer Deburring Tool work on its own?
No, this is an accessory head, not a standalone tool. It mounts in place of the cutter on the Hornady Cam-Lock Trimmer, so you'll need that trimmer already set up to use it. Once installed, it turns your trimmer into a chamfer and deburring station.
What calibers does the Hornady deburring tool cover?
It's a multi-caliber head that handles roughly .17 up through .45 caliber cases. That range covers most common rifle and pistol brass, so you won't need to swap heads for different cartridges. It's a solid choice for reloaders working across a variety of calibers.
Does it chamfer the inside and deburr the outside of the case mouth?
Yes, it handles both the inside chamfer and the outside deburr of the case mouth. Because it uses the trimmer's cam lock positioning, the cuts stay square with the case mouth for consistent results. That squared, smooth edge helps bullets seat cleaner and feed more reliably.
What is the Hornady Cam Lock Trimmer Deburring Tool made of?
It's built from hardened steel with a matte silver finish. That construction holds up to high-volume reloading sessions and keeps its cutting edge over the long haul. It's a durable piece designed to last through plenty of case prep work.





Reviews
There are no reviews yet.