Description
If you reload long enough, you end up with a stash of rounds that need to come apart. Maybe the charge is off, maybe you want to rework an old batch, or maybe you just want to reclaim good components. The Hornady Cam-Lock Bullet Puller handles that job right on your reloading press, no hammering involved. It threads into any press with standard 7/8-14 threads, the same thread as your dies, so setup takes about a minute.
The operation is about as simple as it gets. Raise the cartridge into the puller, clamp down on the bullet, then lift the press arm and the bullet comes out clean. Because it grips the bullet directly and pulls straight, you keep your brass, powder, and the bullet itself ready to reuse. Reloaders who have switched over from the shake-and-bang kinetic style tend to appreciate how much faster and quieter this setup is, with less risk of marring the projectile.
What Makes the Cam-Lock Bullet Puller Tick
The tool uses a steel body paired with a cast metal handle, so it holds up to repeated use. The real trick is the collet system. Each collet is sized to grip a specific bullet diameter, which is how you get a secure hold without crushing the jacket. The collets are sold separately so you can match them to the calibers you actually load.
A Few Things to Know Before You Order
This puller is built for rifle cartridges. It needs enough bullet bearing surface for the collet to grab, which is why it is not meant for pistol rounds. One thing worth noting from folks who use it daily: rounds with a heavy crimp sometimes benefit from a light pass through a seating die first to break the crimp, and then the puller does its thing easily. It is also not intended for cast bullets.
If you want a quick, repeatable way to break down rifle ammo and save your components, the Cam-Lock earns its spot on the bench. Just remember to grab the matching collet for your caliber, since it does not ship with one.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 050095
- UPC: 090255500950
- Product Type: Press Mounted Cam-Lock Collet Bullet Puller
- Function: Pulls bullets from loaded rifle cartridges
- Caliber: Multi-Caliber (requires caliber-specific collet)
- Press Thread Compatibility: Standard 7/8-14
- Material: Steel body with cast metal handle
- Color: Red
- Size: Standard
- Collets: Sold separately
- Quantity: 1
- Weight: 7.2 oz
What’s Included
- Hornady Cam-Lock Bullet Puller (body and handle)
- Product manual
Frequently Asked Questions
Does the Cam-Lock Bullet Puller come with collets?
No, the collets are sold separately. Each collet is sized for a specific bullet diameter, so you pick the ones that match the calibers you load. They are inexpensive, and most reloaders keep a few on hand for the cartridges they work with most.
Will this puller fit my reloading press?
It mounts to any press with standard 7/8-14 threads, which is the same thread used by common reloading dies. That covers the vast majority of single stage and turret presses out there. Setup is as simple as threading it into an open die station.
Can I use the Hornady Cam-Lock Bullet Puller on pistol ammo?
It is intended for rifle cartridges only. Pistol bullets generally do not have enough exposed bearing surface for the collet to get a solid grip. For reliable pulls, stick to rifle rounds with this tool.
What about rounds with a heavy crimp?
The puller works great on standard rounds, and heavily crimped ammo pulls easier with one extra step. Running the round into a seating die first to break the crimp slightly lets the collet release the bullet without a fight. After that, the Cam-Lock pulls it right out. It is not meant for cast bullets.





Reviews
There are no reviews yet.