0
0

Hornady Standard Micrometer 0-1 in, 0.0001 in Resolution

UPC: 090255500721

$61.99

18 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

When you're chasing consistency on the reloading bench, a quality caliper only gets you so far. This Hornady Standard Micrometer reads from 0 to 1 inch in 0.0001 inch increments, which puts it a full order of magnitude finer than most calipers and makes it the tool of choice for verifying bullet diameters, jacket thickness, and other small components that need to be dead on.

What Sets the Hornady Micrometer Apart

The two features reloaders lean on most are the ratchet stop and the spindle lock. The ratchet stop applies uniform pressure every time you close the spindle on a workpiece, so you're not guessing whether you cranked it too tight or too loose, and that consistency is what gives you repeatable numbers measurement after measurement. The spindle lock holds your reading in place when you pull the micrometer off the part, which is handy when you want to double check a value or jot it down without it drifting.

Built to Live on the Bench

The C-frame carries a baked-enamel finish that stands up to the knocks and oils that come with regular shop use, and the whole tool is metal construction through and through. It ships in a fitted plastic storage case, so when you're done it tucks away protected from dust and bench clutter instead of rattling around a drawer.

Where the Standard Micrometer Earns Its Keep

This one shines for anyone casting their own bullets, sorting projectiles by diameter, or chasing tighter groups through more consistent loads. It measures objects up to 1 inch, which covers the vast majority of bullet diameters and small case components you'll run into. If you've outgrown reading everything with a dial or digital caliper and want true ten-thousandth resolution, this is the step up that pays off downrange.

Key Specifications

  • Manufacturer: Hornady
  • Model / MPN: 050072
  • UPC: 090255500721
  • Measuring Range: 0 to 1 inch
  • Resolution: 0.0001 inch
  • Accuracy: +/- 0.0001 inch
  • Frame: C-frame with baked-enamel finish
  • Material: Metal
  • Ratchet Stop: Yes
  • Spindle Lock: Yes
  • Storage: Plastic case included
  • Quantity: 1
  • Shipping Weight: 0.77 lbs

What’s Included

  • Hornady Standard Micrometer
  • Plastic storage case

Frequently Asked Questions

How fine can the Hornady Standard Micrometer measure?

It reads from 0 to 1 inch in 0.0001 inch increments with an accuracy of plus or minus 0.0001 inch. That's ten times finer than a typical reloading caliper, which makes it ideal for verifying bullet diameters and other small components where small deviations matter.

What's the difference between the ratchet stop and spindle lock?

The ratchet stop applies the same amount of pressure each time you close the micrometer on a part, which is what gives you consistent, repeatable readings. The spindle lock holds the measurement in place so it won't move when you remove the tool from the workpiece. Together they take a lot of the guesswork out of precision measuring.

Can I use this Hornady micrometer for cast bullets?

Absolutely. It's a popular choice for checking the diameter of cast bullets since a standard caliper only gets you to about 0.001 inch. The ten-thousandth resolution lets you confirm sizing and sort projectiles with real precision.

Does the Hornady Standard Micrometer come with a case?

Yes, it ships with a fitted plastic storage case that protects the tool when it's not in use. That keeps it safe from dust, dings, and bench clutter so it stays accurate over the long haul.

Additional information

UPC

090255500721

Manufacturer

Manufacturer Part Number

050072

Quantity

1

Shipping Weight

0.77

Reviews

There are no reviews yet.

Be the first to review “Hornady Standard Micrometer 0-1 in, 0.0001 in Resolution”