0
0

Hornady Stuck Case Remover Set | Includes #7 Drill & 1/4-20 Tap

UPC: 090255500332

$21.99

9 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Every reloader runs into it eventually. A case goes into the sizing die without enough lube, the handle gets tight, and suddenly the rim rips off leaving the body wedged solid. The Hornady Stuck Case Remover is the fix that gets you back to loading without buying a new die. It uses a simple drill, tap, and pull method to extract the stuck case with controlled pressure, so your sizer comes out unharmed.

How the Hornady Stuck Case Remover Works

The process is about as straightforward as it gets. You back out the expander and decapping rod so the pin clears the flash hole, secure the die in a vise, then drill through the center of the case head with the included #7 drill bit. Next you run the 1/4-20 tap into that hole to thread it, thread on the remover body, and turn the cap screw down with an allen wrench. As the screw tightens, it draws the stuck case straight back out of the die. No hammering, no prying, and no risk of scoring the inside of your sizer.

A Must-Have Kit for Any Reloading Bench

This is a multi-caliber tool, so it isn't tied to one cartridge. Reloaders have used it to pull everything from 5.56 brass out of a Lee die to a .30-06 case that felt hopelessly jammed in a brand new sizer. The remover body fits the universal shellholder ram on most standard single stage presses, and it plays nice across brands including Hornady, RCBS, and Redding setups.

Stuck cases happen to everyone, even careful folks who lube their brass. Having this set tucked in a drawer means one bad case doesn't cost you a die or stall your loading session. It's a small piece of insurance that pays for itself the first time you need it, and it's made right here in the USA.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 050033
  • UPC: 090255500332
  • Product Type: Stuck Case Remover
  • Caliber/Gauge: Multi-Caliber / Universal
  • Drill Bit Size: #7
  • Tap Size: 1/4-20
  • Fitment: Universal shellholder ram on standard single stage presses
  • Quantity: 1 Set
  • Country of Origin: Made in USA
  • Shipping Weight: 0.239 lbs

What’s Included

  • #7 drill bit
  • 1/4-20 tap
  • Remover body
  • Cap screw / bolt

Frequently Asked Questions

How does the Hornady Stuck Case Remover get a case out without wrecking the die?

You drill through the center of the stuck case head with the #7 bit, thread that hole with the 1/4-20 tap, then thread on the remover body and tighten the cap screw with an allen wrench. The screw pulls the case straight back out using controlled force rather than hammering or prying. Because the pressure is applied to the case and not the die walls, your sizer comes out undamaged.

Will the Hornady Stuck Case Remover work with dies from other brands?

Yes. It's a multi-caliber tool and the remover body fits the universal shellholder ram found on most standard single stage presses, including Hornady, RCBS, and Redding. Reloaders have used it to free brass stuck in Lee dies as well, so it isn't limited to one brand of equipment.

Do I need any extra tools to use this kit?

You'll want a drill for the included #7 bit and an allen wrench for the cap screw, plus a vise to hold the die steady while you work. The kit itself supplies the drill bit, tap, remover body, and bolt. Most benches already have the drill and wrench on hand.

Is the Hornady Stuck Case Remover reusable?

The remover body, bolt, drill bit, and tap are all reusable tools you keep on the bench. The brass case you drill out gets discarded after it's removed since it's no longer usable. One set will handle stuck cases for years of reloading.

Additional information

UPC

090255500332

Manufacturer

Manufacturer Part Number

050033

Caliber/Gauge

Multi-Caliber

Product Type

Stuck Case Remover

Quantity

1 Set

Shipping Weight

0.239

Reviews

There are no reviews yet.

Be the first to review “Hornady Stuck Case Remover Set | Includes #7 Drill & 1/4-20 Tap”