Description
Handloaders chasing tight groups in 6.5 Creedmoor know that sizing is where accuracy gets made or lost. This Hornady Match Grade Full-Length Die gives you direct control over neck tension by using interchangeable, self-centering neck size bushings instead of a fixed one-size-fits-all neck. You pick the bushing that matches your brass and chamber, so you size just enough to get reliable chambering without overworking the necks and burning through case life.
How the 6.5 Creedmoor Match Grade Die Works
The die body is machined to tight tolerances and runs a free-floating spindle, which lets the brass center itself during the sizing stroke for concentric neck expansion and repeatable results pass after pass. A removable elliptical expander gives you the choice to inside-neck size or skip it entirely, depending on how you like to run your process. A knurled spindle lock and the included Sure-Loc ring keep your settings put once you have them dialed, with the ring clamping around the full die body to hold adjustment steady.
What Comes With This Hornady Match Grade Die
This is the full-length sizing die on its own, not a two-die set, so there is no seating die in the box. It ships with the die body, elliptical expander, a decap pin retainer, a hardened steel headed decap pin, and a Sure-Loc lock ring. One thing worth knowing up front: the neck sizing bushing is sold separately. Hornady offers them in small increments so you can fine-tune neck tension to your exact brass, and the die also accepts bushings from Redding, RCBS, and Wilson if you already have some on the bench.
It uses standard 7/8"-14 threads and drops into any common reloading press. For 6.5 Creedmoor reloaders running quality brass and good components, this die is a straightforward way to tighten up your sizing routine and get more consistent, match-ready ammunition out of your press.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 046282
- UPC: 090255462821
- Caliber: 6.5mm Creedmoor (.264)
- Die Type: Match Grade Full-Length Bushing Sizing Die
- Thread Size: 7/8"-14
- Shell Holder: #1 (sold separately)
- Neck Bushing: Sold separately, required to complete the die
- Expander: Removable elliptical expander
- Lock Ring: Hornady Sure-Loc
- Material: Steel
- Country of Origin: United States
- Shipping Weight: 0.54 lb
What’s Included
- Match Grade full-length sizing die body
- Removable elliptical expander
- Decap pin retainer
- Hardened steel headed decap pin
- Hornady Sure-Loc lock ring
Frequently Asked Questions
Does the Hornady Match Grade Die for 6.5 Creedmoor come with a bushing?
No, the neck sizing bushing is sold separately and is required to complete the die. Hornady offers bushings in small increments so you can match neck tension precisely to your brass. The die also accepts Redding, RCBS, and Wilson bushings if you already own some.
Is this a two-die set or just the sizing die?
This is the full-length sizing die only. It does not include a seating die, so if you need a complete setup you would pair it with a seating die separately. The box does include the die body, elliptical expander, decap pin retainer, headed decap pin, and a Sure-Loc lock ring.
Which bushing size should I start with for 6.5 Creedmoor?
The right bushing depends on the loaded neck diameter of your specific brass, since wall thickness varies by headstamp. A common approach is to measure a loaded round's neck and subtract about .002 inch for proper neck tension. Many 6.5 Creedmoor reloaders land somewhere around a .288 to .290 bushing, but measuring your own brass is the only way to be sure.
Will this die fit a standard reloading press?
Yes. It uses the standard 7/8"-14 thread, so it threads right into any common single-stage or progressive press. You will also need a #1 shell holder, which is sold separately.



Reviews
There are no reviews yet.