Description
Hornady's Match Grade line is their top-tier sizing die, and this one is cut for the 25 Creedmoor. Unlike a standard full-length die that sizes the neck with a fixed dimension, this is a bushing die. The body sizing, shoulder bump, and neck sizing all happen in one stroke, but the neck portion is handled by an interchangeable bushing you select for your exact brass and chamber. That means you control neck tension instead of letting the die dictate it, which is a big deal when you're chasing tight groups at distance.
What Sets the Match Grade 25 Creedmoor Die Apart
The bushing floats and self-centers as it sizes, so the neck comes out concentric with the rest of the case. That alignment is where the match-winning reputation comes from. Because you're only squeezing the neck down the amount you choose, you avoid the over-sizing and excessive working that shortens brass life. Pick a bushing a thousandth or two under your loaded neck diameter, and you dial in the grip on the bullet exactly how you want it.
Spindle and Decap Setup on the 25 Creedmoor Bushing Die
It uses Hornady's self-centering spindle with an O-ring tensioner that lets the decap assembly find center as the case enters. The die ships with a decap pin retainer threaded on, plus an elliptical expander you can swap in depending on your preference, along with a replaceable headed decap pin. That same headed pin is what Hornady runs in their Custom Grade dies, and having a spare on hand means a bent or broken pin isn't the end of your session.
Picking a Bushing for the 25 Creedmoor
The one thing to know going in is that the neck bushing is sold separately. Hornady offers them in .001 inch increments, and the die will also accept bushings from Redding, RCBS, or Wilson if you already have some on the bench. For most 25 Creedmoor loads you'll measure the neck of a loaded round and go a touch under that number. It threads into any standard 7/8-14 press, so it drops right into whatever single stage or turret you're running.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 046268
- UPC: 090255462685
- Caliber: 25 Creedmoor (.257)
- Die Type: Match Grade Full Length Bushing Sizing Die
- In Set: Single Die
- Thread Size: 7/8-14
- Neck Sizing: Interchangeable bushing (sold separately)
- Bushing Compatibility: Hornady, Redding, RCBS, Wilson
- Decap Pin: Replaceable headed decap pin (spare included)
- Expander: Elliptical expander included
- Origin: Made in USA
What’s Included
- Match Grade full length bushing sizing die
- Self-centering spindle assembly with O-ring tensioner
- Decap pin retainer (installed)
- Elliptical expander
- Replaceable headed decap pin plus spare
Frequently Asked Questions
Does the 25 Creedmoor Match Grade die come with a bushing?
No, the neck bushing is sold separately. Hornady offers them in .001 inch increments so you can match the exact neck tension your brass and chamber call for. Measure the neck diameter of a loaded round and pick a bushing a thousandth or two under that figure as a starting point.
Is this a complete die set or a single die?
This is a single full-length sizing die, not a two-die set. It handles body sizing, shoulder bump, and neck sizing in one operation. You'll need a separate seating die to load complete rounds.
Will bushings from other brands work in this Hornady die?
Yes. In addition to Hornady's own bushings, this die accepts bushings made by Redding, RCBS, and Wilson. That's handy if you already have bushings on your bench from another caliber or brand.
What does the Match Grade full length die do that a standard die doesn't?
A standard full-length die sizes the neck to one fixed dimension, while this bushing die lets you control neck tension yourself by choosing the bushing. The bushing self-centers and floats as it sizes, which keeps the neck concentric and avoids over-working the brass. The result is straighter cases, longer brass life, and more consistent chambering.




Reviews
There are no reviews yet.