0
0

Hornady Custom Grade Series III Neck Sizer Die 6.5 Japanese 046043

UPC: 090255460438

$35.99

11 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Hornady Custom Grade Series III Neck Sizer Die in 6.5 Japanese fills a real gap for anyone loading this older, harder-to-find cartridge. Neck sizing only works the brass where it counts, leaving the rest of the case shoulder and body fire-formed to your chamber. That means better bullet-to-bore alignment, reduced headspace issues, and brass that lasts noticeably longer than it would with full-length sizing every cycle.

This is a single neck sizing die, not a full die set, so it pairs well with a seating die you likely already have. It uses the standard 7/8"-14 thread that fits just about any common single-stage or turret press. Keep in mind that neck sizing is intended for brass fired and reloaded in the same bolt-action or single-shot rifle. If you shoot a semi-auto, lever, or pump gun, full-length resizing is the better route.

What Sets the Hornady 6.5 Japanese Neck Sizer Apart

Two features do the heavy lifting here. The Zip Spindle design locks the spindle positively in place so it won't slip or walk out of adjustment mid-session. The Hornady elliptical expander is the other standout, offering smoother neck sizing than a traditional ball expander while cutting down on friction and case neck stretch. The internal threading keeps the expander from pulling loose, and it can even handle necking up to the next caliber without a separate expander die.

Build Quality on the Custom Grade Series III Die

Hornady machines and polishes the internal die profile to a smooth finish, which helps cases run through cleanly without sticking or dragging. These dies are backed by Hornady's lifetime warranty, so if something ever wears or breaks under normal use, they stand behind it. For a cartridge like 6.5 Japanese where factory ammo and components can be scarce, having a quality neck sizing die on the bench makes keeping that rifle fed a whole lot more realistic.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 046043
  • UPC: 090255460438
  • Model: Custom Grade Series III
  • Caliber: 6.5 Japanese (.264)
  • Die Type: Neck Sizer
  • Number of Dies: 1
  • Thread Size: 7/8"-14
  • Bullet Diameter: 0.264"
  • Gun Type: Rifle (bolt-action or single-shot)
  • Recommended Shell Holder: #34 (sold separately)
  • Shell Holder Included: No
  • Country of Origin: USA

What’s Included

  • Hornady Custom Grade Series III Neck Sizer Die (1 die)

Frequently Asked Questions

What's the difference between neck sizing and full-length sizing with this 6.5 Japanese die?

This die sizes only the neck of the case rather than the entire body, leaving the shoulder and body fire-formed to your specific chamber. That improves bullet alignment, helps control headspace, and extends case life. It's best suited to brass that gets fired and reloaded in the same bolt-action or single-shot rifle.

Does the Hornady 6.5 Japanese Neck Sizer Die come with a shell holder?

No, the shell holder is not included. This cartridge uses a #34 shell holder, which you'll need to purchase separately if you don't already have it. The die uses the standard 7/8"-14 thread, so it fits common single-stage and turret presses.

Can I use this die on an autoloading or lever-action 6.5 Japanese rifle?

Neck sizing is intended for brass that stays in the same bolt-action or single-shot rifle. Autoloading, lever, and pump guns typically require full-length resizing for reliable chambering. For those actions you'd want a full-length sizing die instead.

Is this a complete die set or a single die?

This is a single neck sizing die, not a full set. You'll still need a seating die to complete your loading process. It pairs well if you already have the matching seater or other dies on your bench.

Additional information

UPC

090255460438

Manufacturer

Manufacturer Part Number

046043

Caliber/Gauge

6.5 Japanese

Reviews

There are no reviews yet.

Be the first to review “Hornady Custom Grade Series III Neck Sizer Die 6.5 Japanese 046043”