0
0

Hornady Match Grade 6mm GT Full-Length 2-Die Set w/ Micrometer

UPC: 090255551167

$175.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're chasing single-hole groups out of a 6mm GT, the dies matter just as much as the brass and powder. Hornady's Match Grade 2-die set gives you real control over two of the biggest accuracy variables in handloading: neck tension and seating depth. The full-length sizing die runs interchangeable, self-centering neck bushings so you set exactly the amount of grip you want on the bullet, instead of oversizing the neck and springing it back out like a standard non-bushing die does. Less working of the brass means more firings per case and more consistent tension round to round.

What Sets the 6mm GT Match Grade Dies Apart

The full-length die also carries a precision-polished elliptical expander that slides through the neck with far less drag than a traditional ball, which cuts down on friction and case-neck stretch. Bushings are sold separately so you can fine-tune to your exact brass and bullet combo. A good starting point is measuring the neck of a few loaded or dummy rounds with a micrometer and dropping .001 to .002 inches off that number to find your bushing size.

Seating Depth Control With the Click-Adjust Micrometer

The seating die is where the newest upgrade lives. Hornady now ships these sets with the Click-Adjust seating micrometer factory installed, so you can move seating depth in tactile, repeatable .001-inch clicks and return to a known setting without guessing. The in-line seating die uses a floating alignment sleeve that pre-aligns the bullet and case before seating, which helps keep runout low. Two seating stems come in the box, including a Custom ELD Match stem shaped for Hornady's match ogives and a standard stem for everything else.

For the 6mm GT crowd running PRS matches, F-Class, or just a precision bolt gun, this set hits the sweet spot between a basic sizing/seating setup and a full custom die. Pair it with the right bushing and you've got a seriously capable match-grade reloading kit built right here in the USA.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 545116
  • UPC: 090255551167
  • Caliber: 6mm GT
  • Bullet Diameter: .243"
  • Die Set: Full-Length 2-Die Set
  • Number of Dies: 2
  • Die Type: Bushing Full-Length Sizer, In-Line Bullet Seater
  • Seating Adjustment: Click-Adjust Micrometer (factory installed)
  • Thread Size: 7/8"-14
  • Shell Holder: #1 (sold separately)
  • Bushings: Sold separately
  • Storage Box Included: Yes
  • Country of Origin: USA

What’s Included

  • Full-length bushing-style sizing die
  • In-line bullet seating die with Click-Adjust micrometer
  • Precision-polished elliptical expander
  • Decap pin retainer
  • Standard bullet seating stem
  • Custom ELD Match bullet seating stem
  • Two Sure-Loc lock rings
  • Plastic storage box

Frequently Asked Questions

Do the Hornady Match Grade 6mm GT dies come with a bushing?

No. The sizing die is a bushing-style die, but the neck bushing itself is sold separately so you can match it to your exact brass and bullet. To pick a size, measure the neck of a few loaded rounds and subtract roughly .001 to .002 inches from that diameter.

Does this set include the Click-Adjust seating micrometer?

Yes. Hornady now ships these Match Grade seating dies with the Click-Adjust micrometer factory installed. It lets you adjust seating depth in repeatable .001-inch clicks and return to a saved setting without re-measuring every time.

Is a shell holder included with the 6mm GT die set?

No, the shell holder is not included. The 6mm GT uses a #1 shell holder, so you'll want to grab one separately if you don't already have it on your bench.

What bushings fit the Hornady Match Grade dies?

Hornady Match Grade bushings are made for these dies and work in both the neck and full-length versions. RCBS bushings are also compatible, and many reloaders report Redding and Wilson bushings fit as well, though Forster bushings are longer and do not fit.

Additional information

UPC

090255551167

Manufacturer

Manufacturer Part Number

545116

Caliber/Gauge

6MM GT

Shipping Weight

1.695

Reviews

There are no reviews yet.

Be the first to review “Hornady Match Grade 6mm GT Full-Length 2-Die Set w/ Micrometer”