Description
The Hornady CX in 6.5mm (.264) at 90 grains is a solid-copper, lead-free hunting projectile that reloaders feed to the 6.5 Grendel and other .264 builds. CX stands for Copper alloy eXpanding, and the design is Hornady's successor to the proven GMX. Being a one-piece copper bullet, it won't separate on impact and holds onto roughly 95% of its weight, so you get deep, straight-line penetration even when you catch bone on a quartering shot. This particular bullet carries a G1 ballistic coefficient of .356 and a sectional density of .184.
What Sets the Hornady CX 90 Grain Apart
Up front sits Hornady's Heat Shield tip, a heat-resistant polymer that shrugs off the aerodynamic friction that can melt lesser tips in flight. That keeps the meplat sharp and the BC steady from muzzle to target, which also means tighter bullet-to-bullet and lot-to-lot consistency when you're working up a load. The grooved shank isn't just for looks either. Those optimized grooves cut down bearing surface and fouling while helping the bullet slip through the air cleaner than a plain shank monolithic would.
Loading the 6.5mm CX for the Grendel and Beyond
At 90 grains this is a lighter .264 offering, which makes it a natural fit for the 6.5 Grendel where velocity and a flat-shooting profile matter. The boat-tail base helps it track true at distance, and because it's an all-copper design it runs a little longer than a comparable lead-core bullet of the same weight, so pay attention to your seating depth and powder workup. Reloaders who want a copper option that expands reliably without turning into a pencil-through-and-gone projectile tend to land on the CX.
Whether you're after deer, hogs, or similar medium to large game, this is a dependable terminal performer that gives you a clean, nontraditional bullet to build your handloads around.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 26111
- UPC: 090255261110
- Caliber: 6.5mm (.264)
- Bullet Diameter: 0.264 in
- Bullet Weight: 90 Grain
- Bullet Style: CX (Copper Alloy eXpanding), Heat Shield Polymer Tip
- Base: Boat Tail
- Construction: Monolithic Lead-Free Copper Alloy
- G1 Ballistic Coefficient: .356
- Sectional Density: .184
- Weight Retention: Up to 95%
- Intended Use: Medium to Large Game Hunting
- Quantity: 50 per Box
What’s Included
- 50 Hornady CX 6.5mm (.264) 90 grain copper alloy bullets
Frequently Asked Questions
What cartridge is the Hornady CX 6.5mm 90 grain designed for?
Hornady built this 90 grain CX with the 6.5 Grendel in mind, where the lighter weight pairs well with the cartridge's case capacity. It will also work in other .264 caliber builds you're loading, as long as your twist rate and load data support it. Always confirm your powder charge and seating depth against current reloading data for your specific cartridge.
Is the CX a lead-free bullet?
Yes. The CX is a one-piece monolithic bullet made entirely from a copper alloy, so there's no lead core. That construction is why it holds up to about 95% of its weight and won't come apart on impact, making it a good pick where nontraditional bullets are preferred.
How does the CX compare to the older GMX?
The CX is Hornady's upgrade to the GMX line. Their engineers reworked the groove geometry and added the Heat Shield tip to improve downrange trajectory and terminal performance over the previous design. In practice that means better aerodynamics and the same reliable deep penetration copper shooters liked about the GMX.
Will the all-copper CX need different load workup than a lead-core bullet?
It can. Because copper is less dense than lead, a 90 grain CX runs longer than a 90 grain lead-core bullet, which affects seating depth and case volume. Start low, watch your overall length, and work up carefully using published CX data rather than substituting lead-core numbers.




Reviews
There are no reviews yet.