Description
Hornady's Match Grade Full Length Sizing Die for .22 Creedmoor is built for handloaders who care about consistency at the press and tight groups at the target. This is the bushing-style full-length sizer, so it sizes the body and bumps the shoulder while letting you dial in neck tension exactly the way you want it. If you already run a seating die or you're building out a custom die station, this single die slots right in without forcing you into a full set.
What Sets the .22 Creedmoor Match Grade Die Apart
The heart of this die is the interchangeable, self-centering neck bushing system. Because you pick the bushing diameter yourself, you can size the neck just enough to hold the bullet without overworking the brass. That means less case stretch, better concentricity, and brass that lasts through more firings. The precision-polished elliptical expander glides through the neck to cut down friction and reduce case-neck stretch on the way out, which keeps your runout in check. Keep in mind the bushing is sold separately so you can match it to your exact brass and the neck tension your rifle likes.
Fitment and Setup for Your .22 Creedmoor Sizing Die
The die uses the standard 7/8-14 thread, so it threads into any common single-stage or progressive press without adapters. A Sure-Loc lock ring comes installed, clamping around the full die body so your setting holds every time you pull the die and put it back. The locking screw grips the ring rather than biting into the die threads, and the wrench flats make hand adjustments easy. A quick tip for picking a bushing: measure the neck diameter of a loaded round, then subtract about .001 to .002 inches to find a solid starting point. Hornady bushings are cross-compatible with Redding, RCBS, and Wilson bushings too, so you're not locked into one brand if you already have some on the bench.
For the .22 Creedmoor crowd chasing flat-shooting, low-recoil precision, this die gives you the repeatability that separates good handloads from great ones.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 046563
- UPC: 090255465631
- Caliber: .22 Creedmoor
- Die Type: Bushing Full Length Sizing Die
- Number of Dies: 1
- Thread: 7/8-14
- Expander: Precision-polished elliptical expander
- Bushing Compatibility: Hornady, Redding, RCBS, Wilson
- Bushing Included: No, sold separately
- Shell Holder Included: No
- Storage Box Included: Yes
- Country of Origin: USA
What’s Included
- Match Grade full-length bushing sizing die
- Sure-Loc lock ring
- Plastic storage box
Frequently Asked Questions
Does the .22 Creedmoor Match Grade die come with a bushing?
No, the neck sizing bushing is sold separately so you can match it to your exact brass and the neck tension you want. This lets you fine-tune the fit rather than being stuck with a one-size setup. Measure the neck diameter of a loaded round and subtract about .001 to .002 inches to find a good starting bushing size.
Is this a complete die set or just the sizing die?
This is a single full-length sizing die, not a two-die set. It's the full-length bushing sizer only, which is ideal if you already own a seating die or you're assembling a custom die station for your .22 Creedmoor. A Sure-Loc lock ring and storage box are included.
Will this die work with my press and non-Hornady bushings?
Yes. The die uses the standard 7/8-14 thread, so it fits any common single-stage or progressive press that accepts standard dies. It also accepts bushings from Redding, RCBS, and Wilson in addition to Hornady's own, so you can use what you already have on the bench.
What does the elliptical expander actually do?
The precision-polished elliptical expander reduces friction as it passes through the case neck on the way out, which cuts down on case-neck stretch and keeps your necks more concentric. Combined with the bushing sizing the outside of the neck, you work the brass less and get more consistent neck tension. The end result is longer case life and better uniformity from your handloads.





Reviews
There are no reviews yet.