$33.99
12 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Hoppe's RC270R is a 36-inch one-piece cleaning rod made from carbon fiber, sized for .270 caliber rifles and other full-length bores like 7mm. The one-piece build is the whole point here. There are no threaded joints in the middle to loosen, flex, or catch on your rifling the way sectioned rods from a basic kit tend to do. That means fewer chances of scraping the inside of your barrel while you push a patch through.
Carbon fiber does two jobs at once. It stays stiff enough to drive a snug brush or jag through a fouled bore, and it won't pick up abrasive grit the way soft aluminum rods sometimes do. That's a real concern, since a rod that collects debris can drag it right down your barrel and wear the crown or lands over time. Folks upgrading from the little multi-piece rods in starter kits tend to notice the difference right away in how solid and controlled the RC270R feels.
The RC270R handle is soft and contoured for a comfortable grip, and it rides on premium double ball bearings. As you stroke the rod through the barrel, the handle lets the tip rotate freely and follow the twist of the rifling instead of forcing against it. That keeps everything gentle on the bore while still letting you put muscle behind stubborn carbon and copper fouling.
This rod is threaded to accept standard brushes, jags, slotted tips, and mops, so it works right alongside the rest of your Hoppe's setup. Pair it with a bore guide when you can, especially on bolt guns cleaned from the chamber end, and you've got a rig that'll keep your .270 running clean for years. It's a simple, durable piece of gear that earns its spot on the cleaning bench.
It's designed for .270 caliber rifles and also works well with 7mm and other similar full-length rifle bores. The threaded tip accepts standard brushes, jags, and slotted tips, so you can match the accessory to the exact bore you're cleaning. As a general rule it suits mid-size rifle calibers rather than rimfire or big-bore work.
One-piece rods have no threaded joints in the middle that can loosen, wobble, or catch on the rifling as you push through. That gives you a straighter, more controlled stroke and less risk of scratching the inside of your barrel. Shooters upgrading from a multi-piece kit rod usually notice how much more solid and precise the RC270R feels.
Yes. Carbon fiber is gentle on steel and, unlike soft aluminum, it's far less likely to embed abrasive grit that could drag down your bore. The ball-bearing handle also lets the tip rotate with the rifling, which keeps the cleaning motion smooth instead of grinding against the lands.
No, the rod ships on its own as a single unit. You'll add your own caliber-specific brushes, jags, mops, or slotted patch tips, which thread right onto the end. Since it uses standard threading, it plays nicely with the rest of your Hoppe's cleaning accessories.
| UPC | 026285002706 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | RC270R |
| Length | 36" |
| Product Type | Cleaning Rod |
| Quantity | 1 |
You must be logged in to post a review.
Reviews
There are no reviews yet.