Hoppe’s 1305AP Phosphor Bronze Bore Brush .338/8mm – 10 Pack

Description

Bronze bristles do the heavy lifting that nylon just can't match. This Hoppe's brush is sized for .338 Winchester Magnum and 8mm Remington Magnum bores, and it goes after lead, carbon, powder residue, and other fouling with a multi-directional scrubbing action. The bronze is softer than your barrel steel, so it digs the gunk out of the grooves without touching the rifling. It threads onto standard Hoppe's cleaning rods using the common #8-32 pattern, so it drops right into the setup you already own.

Where the 1305AP Bronze Brush Earns Its Keep

Bronze brushes shine when the fouling gets thick. A lot of folks run a nylon brush or a patch for quick touch-ups, then reach for bronze when carbon and lead build up and won't budge. That's exactly where this brush lives. Run it wet with your solvent of choice, work it through the bore, and let the bristles break up what's stuck in the corners before you patch it all out.

Why the 10 Pack Makes Sense

Here's the thing about any bronze brush: it's a wear item. The bristles soften and splay out over time, and ammonia-based copper solvents will eat away at bronze faster, which is why plenty of people rinse their brushes right after use. Buying the 1305AP in a 10-pack means you always have a fresh one on the shelf instead of scrubbing with a tired brush that's lost its bite. Toss the worn ones and grab a new brush without a second thought.

Getting the Most From Your Hoppe's Bronze Brush

Use a bore guide when you can, push the brush all the way through before reversing so you don't crimp the bristles, and match your solvent to the material. If you're running an aggressive copper remover, a quick rinse afterward stretches the life of each brush. Simple habits, longer-lasting brushes, cleaner barrels.