$19.99
24 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
When it comes to getting a rifle bore genuinely clean, a phosphor bronze brush earns its keep. This Hoppe's 1304P is sized for .270 caliber and 7mm rifles, and it uses stout bronze bristles to scrub away lead, carbon, powder residue, and other fouling that patches alone leave behind. Bronze is softer than the steel of your barrel, so a properly run brush digs out the gunk without hurting the rifling. Buying it in a ten-pack means you have replacements on the shelf for the day your current brush finally wears out.
The multi-directional bristle design does the heavy lifting here, grabbing fouling from every angle as the brush travels the bore. It threads onto standard cleaning rods with the common #8-32 pattern, so it plays nice with the Hoppe's rods you probably already own along with most other brands. Each brush measures right around 4.9 inches overall, giving you plenty of reach and a solid grip on the fouling.
The old-school rule still holds: run the brush the full length of the bore and out the muzzle before you reverse, rather than changing direction mid-barrel. That keeps the bristles from folding over and losing their bite. A lot of folks like to unthread the brush at the muzzle end so they only scrub in one direction, which is easy to do from the chamber side with a guided rod. Rinsing or spraying the brush clean of solvent after each session helps it last, since aggressive copper removers can be hard on bronze if left to soak.
Bore brushes are consumables. The bristles soften and lose their scrub over time, and a worn brush just isn't doing the job. Having ten on hand means you can rotate in a fresh one the moment you feel the resistance drop off, and if you shoot a lot or keep several .270 and 7mm rifles in the safe, a bulk pack keeps you stocked for a long stretch.
It's sized for .270 caliber and 7mm rifle bores, which covers popular chamberings like .270 Winchester along with the various 7mm cartridges. Because it's matched to bore diameter rather than a specific cartridge, one brush works across any rifle sharing that bore size. If you shoot both .270 and 7mm, this single brush handles both.
No. Bronze is softer than the steel your barrel is made from, so run correctly it scrubs out fouling without harming the rifling. The wear you'll notice happens to the bristles, not the bore, which is exactly why brushes are meant to be replaced over time.
Yes. It uses the common #8-32 thread pattern, so it screws onto standard Hoppe's rods as well as most other major brands. If your rod uses that thread size, you're good to go.
Bore brushes are consumables that lose their scrubbing power as the bristles soften and wear. A ten-pack lets you swap in a fresh brush the moment the old one stops biting, and it's a smart buy if you shoot often or maintain more than one .270 or 7mm rifle.
| UPC | 026285513868 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 1304P |
| Color | CLEANING BRUSH |
| Length | 4.9000 |
| Product Type | Cleaning Brush |
| Quantity | 10 Pack |
| Thread Pattern | #8-32 |
You must be logged in to post a review.
Reviews
There are no reviews yet.