$76.46
4 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Ruger 10/22 is one of the most customized rifles out there, and swapping the factory stock for this Hogue OverMolded is one of the easiest ways to make yours feel like your own. It starts with a super strong, fiberglass-reinforced skeleton that's shaped to fit the 10/22 action, then gets wrapped in the same soft rubber Hogue uses on its famous grips. That rubber chemically bonds to the core during molding, so it isn't a coating that peels or slides around over time. The end result is a non-slip, weather-friendly surface that holds firm whether your hands are wet, cold, or gloved up.
The shape has a sleek straight comb, comfortable palm swells, and a varminter-style forend finished in Hogue's Cobblestone texture for a positive grip when you're settling in on a target. The soft rubber also does a nice job quieting things down. Plenty of folks notice their 10/22 runs noticeably quieter after the swap, and the extra cushion takes the edge off the already mild .22 LR. There's a recoil pad on the back and a length of pull right at 13 3/4 inches, which suits most adult builds well.
What sets this stock apart from a lot of cheap replacements is the aluminum pillar bedding. Those pillars sit at the action mounting point to lock the receiver in place for a consistent, repeatable fit that stays tight round after round. Installation is genuinely simple: drop the action in, line it up with the pillar, and reuse your rifle's original stock attachment screw. It does not use the original barrel band, and front and rear sling swivel studs are already in place.
One thing to double-check before ordering: this model is cut for the standard barrel channel, roughly .909 inch at the receiver tapering to .682 inch at the forend tip. It won't fit .920-inch bull or heavy barrels, so if your 10/22 wears a fat barrel you'll want the bull-barrel version instead. For a standard-profile 10/22, this is a clean, durable upgrade that improves comfort and control without touching the action.
No, this version is cut for the standard barrel channel only, measuring about .909 inch at the receiver and .682 inch at the forend tip. It will not clear a .920-inch bull or heavy barrel. If your 10/22 has a fat barrel, go with Hogue's bull-barrel model instead.
It's a straightforward drop-in. You lower the action into the stock, line it up with the aluminum pillar, and reuse your rifle's original stock attachment screw to tighten it down. It does not use the factory barrel band, and no gunsmithing is needed.
Yes, front and rear sling swivel studs are already installed, so you can mount a sling right out of the box. There's also a recoil pad on the back end for a little extra cushion.
The pillar sits at the action mounting point and gives the receiver a firm, metal-to-metal seat instead of relying on the rubber alone. That keeps the action fit tight and repeatable so it won't shoot loose over time, which helps with consistency at the range.
| UPC | 743108220009 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 22000 |
| Color | Black |
| Length | 34.7000 |
| Model | |
| Product Type | Stock |
| Shipping Weight | 2.5 |
| Style | Sporter |
You must be logged in to post a review.
Reviews
There are no reviews yet.