Description
The stock front sight on a Walther P22 does the job, but it can wash out in bright sun or fade into a busy target. This HiViz interchangeable front sight fixes that by putting a glowing fiber optic dot right where your eye wants to go. It fits both the P22 and P22Q, and the blade measures 0.215 inches, the same as the factory #3 front sight, so your point of aim stays where you expect it.
What makes this one worth grabbing is the interchangeable LitePipe setup. The sight comes with six replaceable pipes in red, green, and white, which means you can experiment and land on the color that jumps out fastest against different backgrounds. Green tends to be the easiest to see for most eyes, red cuts through cluttered targets, and white gives you a neutral option. The fiber pipes gather ambient light and concentrate it into a bright aiming point, so the brighter your surroundings, the more that dot lights up.
Why the HiViz P22 Sight Earns Its Spot
This is a range and daylight performer first and foremost. It shines when you are out in the sun or under decent indoor lighting, where fiber optics really do their thing. It is built on an all-steel body, so it holds up to regular shooting and handling without feeling flimsy. Keep in mind fiber optic pipes rely on available light, so this is not a night sight, but for practice sessions, plinking, and daylight shooting it makes finding your front sight noticeably quicker.
Getting the HiViz WAL2012 Installed
Installation is straightforward for a hands-on owner. The sight secures with a small Allen-head cap screw, and the included key wraps up both the install and swapping LitePipes down the road. HiViz backs it with a limited lifetime warranty on the sight itself, though the LitePipes are treated as a wear item since they can dim over years of use. A quick heads up for anyone with a 5-inch barrel P22, this sight is intended for the standard-length models, so double-check your setup before ordering.
Key Specifications
- Manufacturer: HiViz
- Manufacturer Part Number: WAL2012
- UPC: 613485588859
- Model: Interchangeable
- Fits: Walther P22 and P22Q
- Sight Type: Fiber Optic Front Sight
- Frame Material: Steel
- Sight Height: 0.215 in (equivalent to factory #3)
- LitePipe Colors: Red, Green, White
- LitePipes Included: 6
- LitePipe Diameter: 0.090 in
- Warranty: Limited lifetime (sight body)
What’s Included
- HiViz WAL2012 interchangeable front sight
- Six replaceable LitePipes (red, green, and white)
- LitePipe carry case
- Allen wrench/key for installation and LitePipe changes
Frequently Asked Questions
Will this HiViz sight fit my Walther P22Q?
Yes. The WAL2012 is designed for both the Walther P22 and P22Q pistols. It matches the factory #3 front sight height of 0.215 inches, so your zero and sight picture stay consistent with what you are used to.
How hard is the HiViz P22 front sight to install?
It is a manageable job for most hands-on owners. The sight is held in place by a small Allen-head cap screw, and the included key handles both the installation and future LitePipe swaps. If you are not comfortable working on your slide, a gunsmith can knock it out in minutes.
Does this front sight work in the dark like a night sight?
No, it is a fiber optic sight, not a tritium night sight. The LitePipes gather ambient light and glow brightest in sunlight or under good indoor lighting. For low-light or nighttime use you would want a tritium option instead, but for daylight and range work this sight really pops.
Why does it come with so many LitePipe colors?
The interchangeable design lets you tune the sight to your eyes and your shooting conditions. You get red, green, and white pipes to try out, and you can swap them anytime with the included key. Green is usually the easiest to see, but many folks prefer red for cutting through cluttered targets.





Reviews
There are no reviews yet.