$190.00
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Hiperfire built its reputation on triggers that feel a cut above the rest, and the X2S MOD-1 carries that same DNA into a two-stage design. You get a distinct wall between the first and second stages, which lets you take up the slack and settle in before the break. That extra bit of control is what makes a two-stage feel so natural for precision work, and the MOD-1 leans into it with a first stage that runs slightly longer than the MOD-2 and MOD-3 for a more defined prep.
The magic here is in the internals. The Cam-Over Toggle Engine loads the toggle springs as you pull, then releases that stored energy to drive the hammer forward with real authority. That means you can run a lighter pull weight up front without worrying about light primer strikes on the back end. The Radical Sear Mechanics also let the trigger work with heavier hammer springs, which helps with long-term durability and reliable ignition across different ammo.
This trigger ships with two sets of springs so you can tune it to your taste. The first stage adjusts between roughly 2 and 2.5 pounds, the second stage wall sits around 1.5 pounds, and total pull lands between 3.5 and 4 pounds depending on whether you run the green or red springs. The Soft Start Lock-Up smooths out the release to help cut down on flinch, and the Tactile Weightless Break means there's no mushy over-travel dragging behind the shot.
The MOD-1 is a semi drop-in unit that works with AR-15, AR-10, and AR-9/PCC variants, including the SIG Sauer MPX. Everything is built from mil-grade steel components and wears a black manganese phosphate coating that holds up to hard use. The curved trigger bow is shaped for a familiar feel and will accept Hiperfire's HIPERSHOE finger pad if you want to customize it later. It's made in the USA, which is a nice bonus for folks who like to keep their builds homegrown.
The X2S MOD-1 gives you a total pull between 3.5 and 4 pounds depending on which springs you install. The green springs land you at the lighter end and the red springs bring it up toward 4 pounds. The first stage runs about 2 to 2.5 pounds with a 1.5 pound second stage wall.
Yes. The X2S MOD-1 is designed for AR-15, AR-10, and AR-9/PCC variants, including the SIG Sauer MPX. It uses standard fire control pockets, so as long as your lower follows mil-spec dimensions you're good to go.
The MOD-1 has a slightly longer first stage than the MOD-2 and MOD-3, which gives you a more defined prep before hitting the wall. It shares the same curved bow and manganese phosphate finish as the MOD-2, while the MOD-3 uses a flat bow instead. If you like feeling more first-stage travel before the break, the MOD-1 is the one to grab.
It's a semi drop-in design, so it installs as a fire control group using your standard trigger and hammer pins rather than a self-contained cassette. There are a few springs to set during install, but the process is straightforward with a punch and a little patience. Plan a few extra minutes compared to a fully enclosed drop-in unit.
| UPC | 859177004485 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | X2SM1 |
| Product Type | Trigger |
| Model | |
| Color | Black |
| Style | 2-Stage |
You must be logged in to post a review.
Reviews
There are no reviews yet.