$27.00
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you own a Henry Long Ranger (H014) and want to add a scope or other optic, the factory receiver doesn't leave you much to work with. This EGW one-piece Picatinny base solves that cleanly. It bolts directly to the H014 series receiver and gives you a true Mil-Std 1913 rail to mount rings and accessories, machined from domestic 6061 T6 extruded aluminum and finished in a tough matte black Type II anodizing that holds up to years of field use.
This is a 0 MOA rail, which is the setup you want for most shooting inside 500 yards. EGW makes a 20 MOA version for folks reaching way out past that, but for hunting and general range work with the Long Ranger, the flat 0 MOA base keeps your scope's adjustment range centered where you need it. Picatinny cross slots run the full length of the rail, so you've got plenty of flexibility to slide rings fore and aft and dial in proper eye relief with whatever optic you're running.
EGW machined a channel down the center of the rail to shave weight, and in many cases that same channel leaves your factory iron sights usable underneath the glass. The whole package comes in at right around 2 ounces, so you're not adding meaningful bulk to the rifle. One detail worth passing along: EGW recommends measuring the hole spacing on your receiver to confirm it matches their published dimensions before you order, just to be sure you've got the right fit.
Installation is straightforward. Snug the screws to 20 inch pounds with a drop of blue Loctite and you're set. From the mounting screws and wrench bit right down to the packaging, every bit of this rail is made in the USA, which is a nice match for an American-made lever gun like the Long Ranger.
This base is made specifically for the Henry Long Ranger H014 series rifle. It is not designed for Henry's H009 or H010 series guns, so make sure your rifle is an H014 before ordering. EGW also suggests measuring the hole spacing on your receiver to confirm it matches their published dimensions.
The 0 MOA rail is the right pick for most shooting inside 500 yards, which covers typical hunting and range work with the Long Ranger. EGW recommends the 20 MOA version if you plan to stretch things out to the 500 to 1000 yard range. For the majority of Long Ranger owners, this 0 MOA base is the way to go.
EGW machined a channel down the center of the rail to cut weight, and in many cases that channel leaves the factory iron sights usable underneath. Results can depend on your exact optic and ring height. If keeping your irons is a priority, mount your glass and check the sight picture before committing.
The mounting screws and a T-10 Torx bit come in the package. EGW recommends torquing the screws to 20 inch pounds and adding a drop of blue Loctite, which is sold separately. A torque wrench helps you hit that spec without over-tightening.
| UPC | 841370117352 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 46210 |
| Color | Black |
| Length | 8.2500 |
| Model | |
| Style | Picatinny Rail |
You must be logged in to post a review.
Reviews
There are no reviews yet.