Description
The Hawke Endurance 30 WA SF 4-16×50 is one of those scopes that punches well above its class once you get behind the glass. Built on a 30mm one-piece mono-tube chassis and running Hawke's H5 optical system, it pairs low-dispersion Crown glass with 18-layer fully multi-coated lenses to pull in light and hold contrast from first light to last. The wide-angle design delivers a roughly 24-degree field of view, which gives you noticeably more to look at than a standard scope at the same power, and the generous 4-inch eye relief keeps you comfortable behind hard-kicking rounds.
Why the Endurance 30 WA Earns Its Keep in the Field
The 4-16x magnification range covers a lot of ground, from brushy timber work at the low end to open-country shots when you crank it up. Parallax is handled with a side focus knob that dials in sharp, parallax-free images from 15 yards out to infinity, so you are not fighting a fuzzy picture at any realistic distance. Field reports back this up, with hunters noting clean target views well past 200 yards and clarity that holds up even in heat mirage on longer shots.
The LR Dot Reticle and Illumination Setup
This model runs the second focal plane LR Dot (8x) reticle, a glass-etched design with a German #4-style outline, a center dot, and ballistic holdover points below center. Because it is SFP, the reticle subtensions are true at 8x, and at that setting the thick posts frame roughly the body length of a mid-sized deer at 100 yards for quick informal ranging. The red illumination runs on a multi-LED system with six brightness levels and off positions between each click, powered by a CR2032 battery, so you can bump the dot bright enough to stand out in daylight or dial it down for low light.
Built to Take a Beating
The Endurance is nitrogen purged, shockproof, waterproof, and fog proof, so weather and recoil are not going to shake its zero. Exposed, locking turrets click in 1/4 MOA increments with 75 MOA of windage and elevation travel, a high-torque rubber zoom ring, a fast-focus eyebell, and a threaded objective that accepts the included sunshade. The whole package is backed by Hawke's No-Fault Lifetime Warranty.
Key Specifications
- Magnification: 4-16x
- Objective Lens: 50mm
- Tube Diameter: 30mm Mono-Tube
- Reticle: LR Dot (8x), Illuminated
- Focal Plane: Second Focal Plane (SFP)
- Illumination: Red, 6 Levels (Multi-LED)
- Parallax: Side Focus, 15 yds to Infinity
- Click Value: 1/4 MOA
- Adjustment Range: 75 MOA Windage & Elevation
- Eye Relief: 4 in (102mm)
- Field of View: 31.2 – 7.8 ft @ 100 yds
- Exit Pupil: 13 – 3mm
- Lens Coating: 18-Layer Fully Multi-Coated
- Length: 14.5 in (369mm)
- Weight: 22.7 oz (644g)
- MPN / UPC: 16350 / 5054492163502
What’s Included
- Hawke Endurance 30 WA SF 4-16×50 LR Dot Riflescope
- Flip-up lens covers
- 4-inch screw-in sunshade
- CR2032 battery
- Lens cloth
- Instruction manual
Frequently Asked Questions
Is the Hawke Endurance 30 WA 4-16×50 first or second focal plane?
It is a second focal plane (SFP) scope, so the reticle stays the same visual size as you zoom through the magnification range. The LR Dot subtensions and holdover points are calibrated to be true at 8x. If you want to use the ballistic aim points accurately, set your magnification to 8x.
What reticle does this scope use and is it illuminated?
This model runs the glass-etched LR Dot (8x) reticle, which features a German #4-style outline, a center aiming dot, and holdover points for longer shots. The dot is illuminated red with six brightness levels controlled by a multi-LED system, with off positions between each setting. It runs on a single CR2032 battery that comes in the box.
Does the Hawke Endurance 4-16×50 have adjustable parallax?
Yes, it uses a side focus knob to adjust parallax from 15 yards out to infinity. That lets you dial in a crisp, parallax-free image whether you are shooting close range or stretching things out. Side focus is a lot handier than an adjustable objective since you can make the change without taking your eyes off the scope.
What size rings do I need to mount this scope?
The Endurance 30 WA has a 30mm main tube, so you will need 30mm rings rather than one-inch rings. With a 50mm objective and the included sunshade, medium or high rings are usually the safe bet to clear the objective bell. Match the ring height to your rifle and cheek weld for the best fit.





Reviews
There are no reviews yet.