Description
There are plenty of rimfire bolt guns out there, but not many that run like the Hammerli Force B1. Instead of the usual lift-and-pull bolt, this one uses a toggle-style straight-pull action pulled straight from Hammerli's competition heritage, the same German maker that has been building precision rimfires and Olympic-grade target guns since 1863. The handle sits out to the side, you get a couple fingers on it, and the whole cycle is one short horizontal stroke. It takes about a magazine to get used to, and then you realize you can run follow-up shots almost as fast as a semi-auto while keeping the reliability of a manually operated action. That matters in .22 WMR, where you want every bit of that flat-shooting magnum performance on target.
What Makes the Force B1 Different
The quick-change barrel system is the party trick here. Pull back the spring-loaded bushing on the receiver, it works like a quick-connect air fitting, and the 16.1 inch barrel slides free with no tools. Hammerli sells barrels in other lengths and in .22 LR, so one receiver can wear a few different hats. Feeding comes from familiar Ruger rotary-style magazines, with a 9-round .22 WMR mag in the box, and the trigger group follows the 10/22 pattern, which opens the door to a huge aftermarket of drop-in triggers.
Set Up the Force B1 Your Way
The all-weather black synthetic stock adjusts for both length of pull and comb height without tools, so getting square behind an optic is quick work. Speaking of glass, there is a full-length Picatinny rail machined into the receiver, plus M-LOK slots up front for a bipod and a QD cup at the toe of the stock for a sling. The barrel wears standard 1/2×28 threading under a knurled protector, and the quiet-closing action makes this a natural pairing with a suppressor. At around 5.75 pounds, it carries easily on a squirrel ridge or a prairie dog town, and it is every bit as much fun ringing steel on a lazy afternoon.
Key Specifications
- Manufacturer: Hammerli Arms
- Manufacturer Part Number: 5802000
- UPC: 723364235405
- Caliber: .22 WMR (22 Magnum)
- Action: Toggle-style straight-pull bolt action
- Barrel Length: 16.1 in
- Muzzle Threading: 1/2×28 TPI with thread protector
- Capacity: 9+1 rounds
- Magazine Type: Ruger rotary-style magazine
- Stock: Black synthetic, tool-less adjustable LOP and comb height
- Optics Mounting: Integral Picatinny rail (no iron sights)
- Forend: M-LOK accessory slots
- Weight: Approx. 5.75 lbs
- Overall Length: 35.5 to 37.4 in (adjustable stock)
- Finish: Matte black
- Country of Origin: Germany
What’s Included
- Hammerli Force B1 .22 WMR rifle
- One 9-round rotary magazine
- Knurled thread protector
- Owner's manual
Frequently Asked Questions
Does the Hammerli Force B1 use Ruger 10/22 magazines?
Yes, it feeds from Ruger rotary-style magazines, and this .22 WMR version ships with a 9-round magnum rotary mag. The magwell uses Hammerli's adapter system, so if you add a .22 LR barrel later, standard 10/22 mags will run with the included spacer setup. That means cheap, proven magazines are easy to find just about anywhere.
Can I switch the Force B1 to .22 LR?
You can. The receiver has a tool-less quick-change barrel system where you pull back a spring-loaded bushing and the barrel slides right out. Hammerli offers additional barrels in .22 LR and different lengths, so one rifle can cover both cartridges with a barrel and magazine swap.
Is the Force B1 suppressor ready?
It is. The 16.1 inch barrel is threaded 1/2×28 TPI, the most common rimfire suppressor pitch, and comes with a knurled thread protector. The straight-pull action also closes quietly, which pairs nicely with shooting suppressed.
Does the Hammerli Force B1 come with sights?
No iron sights are included. Instead, the receiver has a Picatinny rail machined right into the top, giving you plenty of real estate for a scope or red dot. Given how flat .22 WMR shoots out to 100 yards and beyond, a magnified optic is the way most owners set this rifle up.







Reviews
There are no reviews yet.