Description
The hammer strut is one of those parts most people never think about until something goes wrong. It's a small rod-like component that pivots off the hammer and rides down to bear against the mainspring cap, transferring mainspring tension to hold the hammer hooks firmly against the sear when the gun is cocked. When the trigger is pulled and the sear releases, that same mainspring energy drives the hammer forward to strike the firing pin. It's a critical link in the firing sequence, and a worn, bent, or broken strut can cause misfires, hammer follow, or inconsistent trigger feel.
This is the genuine Springfield Armory OEM replacement part, manufacturer part number PI0018. It's dimensioned and engineered specifically for Springfield's 1911 platform, which matters because Springfield 1911s aren't built to identical tolerances as some other manufacturers. Using the factory strut means you're working with a part that's made to the same specs as what came out of the gun originally. That's especially important when you're dealing with fire control components where geometry and fit directly affect function.
Compatibility is broad across the Springfield lineup. This strut fits the Loaded, Mil-Spec, High Capacity, and Micro Compact 1911 models chambered in .45 ACP. Whether you're refreshing a hard-used duty gun, stocking up spare parts for a competition pistol, or replacing a strut that finally gave out after thousands of rounds, this is the correct piece to reach for.
Installation requires removing the grips and mainspring housing to access the fire control components. The strut is retained to the hammer via the hammer strut pin (PI0019, sold separately). If you're not already comfortable with 1911 internals, having a gunsmith handle the swap is a reasonable option, though many experienced owners handle it without issue.
Key Specifications
- Manufacturer: Springfield Armory
- Manufacturer Part Number: PI0018
- UPC: 706397855697
- Part Type: Hammer Strut
- Compatible Models: Loaded Models 1911, Mil-Spec 1911, High Capacity Models 1911, Micro Compact Models 1911
- Caliber Compatibility: .45 ACP
- OEM or Aftermarket: OEM / Factory Original
- Related Part: Hammer Strut Pin PI0019 (sold separately)
Frequently Asked Questions
What does the hammer strut do in a 1911?
The hammer strut is a pivoting rod attached to the hammer that rides against the mainspring cap, transferring mainspring pressure to keep the hammer hooks engaged with the sear when the gun is cocked. When the trigger is pulled and the sear releases, the mainspring energy stored through the strut drives the hammer forward to strike the firing pin. It's a fundamental part of the firing cycle, and a damaged or incorrect strut can cause hammer follow, light strikes, or misfires.
Will this fit my Springfield Armory 1911 Loaded model?
Yes, part PI0018 is listed as the factory hammer strut for the Springfield Armory Loaded Models 1911 in .45 ACP, along with the Mil-Spec, High Capacity, and Micro Compact variants. It's the same OEM part that Springfield uses in these guns from the factory, so fit and function should be correct for those platforms.
Do I need to buy the hammer strut pin separately?
Yes, the hammer strut pin (Springfield part PI0019) is a separate component. The strut itself pivots off the hammer and is retained in place by this pin. If your existing pin is in good shape, you can reuse it, but if you're doing a full fire control refresh it's worth replacing both at the same time while you have everything apart.
Can a worn or broken hammer strut affect trigger feel or reliability?
Absolutely. If the strut is bent, worn at the contact point, or incorrectly sized, it can affect how consistently the mainspring tension is applied. In some cases it can cause the hammer to follow the slide forward during cycling, which is a real reliability concern. Replacing it with the correct factory strut is one of the most straightforward ways to restore proper function.
Is this a DIY install or does it need a gunsmith?
Accessing the hammer strut requires removing the grips and mainspring housing, which is within reach for anyone comfortable with basic 1911 disassembly. That said, fire control parts interact closely with each other, so if you're not confident in your experience with 1911 internals, having a qualified gunsmith handle the installation is always a solid option.




Reviews
There are no reviews yet.