$25.99
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
GrovTec earned its reputation by machining sling hardware to tolerances most brands skip, and this heavy-duty push button set is a great example. It's built for 1 1/4" slings and gives you true quick detach convenience, so you can drop your sling off a hunting rifle or range gun with a press of the button and click it right back on when you need it. The steel body loop and stainless steel bases lock up tight, and the whole pair has been pull tested to over 450 pounds of tension, which is a good chunk stronger than a standard 1" locking swivel.
The body wears a corrosion-resistant black oxide finish over steel, paired with stainless steel bases that shrug off moisture in the field. Folks who build custom tactical and hunting rifles reach for these because they behave like factory parts and don't rattle or wiggle once installed. Depress the button, pull, and your sling is off. Push it back into the base and it snaps into a rock-solid lockup, even in nasty weather.
The real appeal of this set is the flush-mount design. The bases countersink into the stock so the cups sit recessed, which means no exposed studs digging into your hand or catching gear when you're shooting off a bag. Take the sling off and you're left with a clean, low-profile stock. That's exactly what you want on a precision setup or a rifle you carry all day.
Installation takes a little shop work. The threaded bases use a 9/16"-18 UNF thread, so you'll drill the stock and tap it with a 9/16-18 bottom tap, then a light coat of two-part epoxy locks everything in place. A 1/2" Forstner or brad point bit and the right tap make it a clean job. GrovTec also offers a base installation tool and glue-in cups if you'd rather not chase down the tap. Made in the USA and backed by a lifetime guarantee.
This set is made for 1 1/4" slings. If your sling has 1 1/4" webbing at the ends, these swivels will thread through and hold securely. They won't fit narrower 1" slings, so double-check your sling width before ordering.
The threaded bases use a 9/16"-18 UNF thread. You'll drill your stock with a 1/2" Forstner or brad point bit, tap the hole with a 9/16-18 bottom tap, then seat the base with a light coat of two-part epoxy. GrovTec also sells a base installation tool and glue-in style cups if you'd rather not track down the tap.
The pair is pull tested to over 450 pounds of tension, which is noticeably stronger than a standard 1" locking swivel that's rated around 300 pounds. The steel body loop and stainless bases give you a rock-solid lockup even in tough field conditions. This is heavy-duty hardware meant to take a beating.
No, and that's the whole point of the flush-mount design. The bases countersink into your stock so the cups sit recessed, leaving no snag point when the sling is removed. It's ideal for shooting off a bag or carrying a clean, low-profile rifle.
| UPC | 811071012959 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | GTSW295 |
| Color | HD PUSH BUTTON SWIVEL SET |
| Length | 5.2000 |
| Product Type | Swivel |
| Shipping Weight | 0.22 |
| Style | Rifle Swivels |
You must be logged in to post a review.
Reviews
There are no reviews yet.