0
0

Ghost PRO 3.3 Fitted Trigger Connector for Glock Gen 1-5

UPC: 644406906681

$37.75

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Ask any Glock owner what they'd change first and the trigger usually tops the list. The factory setup gets the job done, but that spongy pre-travel and long, sloppy over-travel leave a lot of accuracy on the table. The Ghost PRO 3.3 connector tackles both. It replaces your stock connector to bring the roughly 5.5-pound factory pull down toward 3.3 pounds while smoothing out the whole stroke and tightening up the reset. Ghost machines these from stainless steel here in the USA, and they back them with a lifetime warranty.

What the Ghost PRO 3.3 Fixes on Your Glock

The big win here is the Trigger Control Tab, or TCT. It knocks out the famous Glock "bump" or glitch, that little wall of resistance you feel when the trigger bar meets the connector, which tends to nudge the muzzle off target right before the shot breaks. The PRO 3.3 also shortens over-travel, the extra rearward movement after the striker releases that pulls your shots low and to one side. The result is a pull that feels lighter, breaks cleaner, and gives you a quicker, more repeatable first-shot advantage.

Fitting the PRO 3.3 Connector the Right Way

This one is not a drop-in part, and that's by design. It arrives long on purpose so you can fit the TCT to your exact pistol by shaving it down in small increments. The usual routine is to install it first, test the release with light pressure, then stone or file the tab a hair at a time until you dial in a clean break with a reliable reset. Most folks who've been inside a Glock before wrap this up in an hour or less. Take your time, test often, and you only have to do it once.

Glock Models the PRO 3.3 Works With

This version covers Gen 1 through Gen 5 frames across the full-size, compact, and subcompact lineup, including guns like the G17, G19, G22, G23, G26, G27, G34, and G35. It does not fit the slimline pistols, the G42, G43, G43X, and G48, which use a separate Ghost connector built for those frames. Pair it with a lighter plunger spring if you want to smooth things out even further, and you've got a setup that plays nice with OEM and most aftermarket trigger shoes.

Key Specifications

  • Manufacturer: Ghost Inc.
  • Manufacturer Part Number: GHO_PRO_3.3
  • UPC: 644406906681
  • Model: For Glock Gen 1-5
  • Product Type: Trigger Connector
  • Pull Weight: Approx. 3.3 lb
  • Material: Stainless Steel
  • Finish: Stainless / Silver
  • Country of Origin: Made in USA
  • Installation: Fitted, minor trimming required
  • Compatibility: Glock Gen 1-5 (excludes G42, G43, G43X, G48)
  • Warranty: Ghost Lifetime Warranty

What’s Included

  • Ghost PRO 3.3 fitted trigger connector
  • Installation instructions

Frequently Asked Questions

Is the Ghost PRO 3.3 a drop-in connector?

No, it's a fitted connector, which is intentional. It comes long so you can shave the Trigger Control Tab down to match your exact pistol. Install it first and test the release with light pressure, then file or stone the tab in small steps until you get a clean break with a solid reset.

Which Glock models does the PRO 3.3 fit?

It's built for Gen 1 through Gen 5 frames across the full-size, compact, and subcompact lineup, so guns like the G17, G19, G22, G23, G26, G34, and G35. It does not fit the slimline models. If you have a G42, G43, G43X, or G48, Ghost makes a separate PRO connector for those frames.

How much does the PRO 3.3 lighten the trigger pull?

It brings the roughly 5.5-pound factory pull down toward 3.3 pounds, so you're shaving off about two pounds. Beyond the weight, it removes the pre-travel bump and tightens over-travel, which is where a lot of the smoother feel comes from. Adding a lighter plunger spring can drop it a touch more and clean up the stroke.

Will the PRO 3.3 work with an aftermarket trigger shoe?

Yes, this connector plays well with OEM and most aftermarket trigger bars and shoes. Since it's the connector doing the work, you can run it with your existing setup or a trigger from another brand. It's a good option if you're building out a custom fire-control group piece by piece.

Additional information

UPC

644406906681

Manufacturer

Manufacturer Part Number

GHO_PRO_3.3

Product Type

Trigger

Model

Reviews

There are no reviews yet.

Be the first to review “Ghost PRO 3.3 Fitted Trigger Connector for Glock Gen 1-5”