$289.00
14 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Geissele Hi-Speed National Match is the trigger that put Geissele on the map, and it earns its reputation. Instead of locking you into one pull weight, this set gives you a single steel two-stage trigger plus three separate spring sets, letting one trigger cover competition, precision work, and duty use. You adjust first and second stage weight distribution, total pull weight, over-travel, and sear engagement to match how you shoot, then leave it tuned and forget about it.
The Service Rifle springs are CMP approved and hold a 4.5 pound minimum total pull, running roughly 3.2 to 5 pounds on the first stage with a 0.5 to 1.5 pound second stage, so you can stack most of the weight up front and get a crisp break at the wall. The DMR springs run a heavier second stage for tactical and field use where a firmer break matters, giving a total pull around 3 to 5.1 pounds. The Match springs drop things way down, roughly 1.9 to 3.4 pounds total with a 6 to 14 ounce second stage, built for High Power space guns and precision work where trigger control is everything.
This is a two-stage curved M4-style bow cut from tool steel with a black oxide finish, so it holds up to real round counts. It uses standard mil-spec .154 inch trigger and hammer pins and drops into any mil-spec AR-15 or AR-308 lower. Note it is not made for the Sig MPX/MCX or pistol caliber carbine AR variants.
The full-power hammer spring is a big part of the story. It drives more energy into the firing pin for consistent primer ignition, which matters when you are running hand loads or chasing accuracy at distance. Pair that with the fast lock time and repeatable break, and it is easy to see why this trigger has been a High Power staple for years. If you want one trigger that adapts as your needs change, this one does the job.
Yes. Geissele consolidated the old Hi-Speed Service, DMR, and Match triggers into this single National Match set, so you get one trigger and hammer plus the springs for all three configurations. You swap springs to change the feel and pull weight rather than buying separate triggers. That makes it a flexible option if your shooting needs change over time.
The Service Rifle spring set is approved for CMP-sanctioned matches because it meets the 4.5 pound minimum total pull weight required in those events. The Match spring set is aimed at NRA High Power competition with space guns where pull weight is unrestricted. You just install the spring set that fits the event you are shooting.
It drops into any mil-spec AR-15 or AR-308 (AR-10) lower that uses standard .154 inch small trigger and hammer pins. It is not compatible with the Sig MPX/MCX or pistol caliber carbine AR variants. If your lower is standard mil-spec, you are good to go.
Very. Between the three spring sets and the adjustment screws, you can run anywhere from a light match break around 1.9 pounds up through a heavier 5-plus pound duty pull. You can also tune the first and second stage balance, over-travel, and sear engagement to fine-tune the break exactly how you want it.
| UPC | 854014005182 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 05-181 |
| Color | Black |
| Model | |
| Product Type | Trigger |
| Style | 2-Stage |
You must be logged in to post a review.
Reviews
There are no reviews yet.