$11.99
762 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
G96 has been in the gun care game since the 1950s, and their Triple Action Gun Treatment is the product that put them on the map. This 4.5 oz aerosol does the work of three separate bottles by cleaning, lubricating, and protecting in one operation. Give it a spray, let it sit for about a minute, then wipe it down. You pull off the powder residue, leading, and light surface rust, and you leave behind a protective coating that keeps your metal happy.
The standout here is the lubricant package. G96 built this formula around active lubricants that came out of missile research, and the practical upside is that it holds up in temperature extremes. It stays put and keeps moving parts working from around -50 degrees all the way up past 300, so your firing pin and action keep cycling whether you are hunting in a January deer stand or running drills in summer heat. It also won't oxidize or evaporate on you, so the protection sticks around between uses.
After it goes to work, G96 Gun Treatment leaves an invisible film across the metal that shields against rust in about every condition you can throw at it, including saltwater spray. That same film guards frequently handled guns against fingerprint etching, which is a real thing on carbon steel. Unlike some CLPs, this one wipes down clean and does not leave a gummy, sticky mess behind to attract grit.
It is genuinely easy to use. Spray it over the area you want to treat, wait about 60 seconds, and wipe with a clean cloth. Hit the metal surfaces, the chamber, and inside the barrel. For a first-time treatment or long-term storage, run it through a few passes, wiping dry between coats. And because it plays nice with polymer, you can use it across modern handguns and rifles without babying the frame. Toss the can in your range bag or keep it on the bench and you are covered.
Yes, it is built to clean, lubricate, and protect in a single operation. The solvents pull off powder fouling, leading, and corrosion, while the lubricants keep parts moving and the protective film guards against rust. For most routine maintenance you can handle everything with this one can.
It is. The formula is specifically noted as safe for use on polymers, so you can spray it on modern striker-fired pistols and polymer-framed rifles without worry. That said, the real magic is on metal, where it leaves the protective anti-rust film.
Spray it evenly over the metal, let it set for about 60 seconds, and wipe with a clean cloth. For storage or a first-time treatment, apply it three times, wiping dry after the first and second coats. Let the solvent flash off for around 10 minutes before sealing the gun in an airtight case.
That is one of its strengths. The active lubricants are designed to keep working down to roughly -50 degrees and up past 300, so the firing pin and moving parts stay reliable in bitter cold or serious heat. It won't freeze, oxidize, or evaporate on you.
| UPC | 616774105515 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 1055 |
| Product Type | Lubricant |
| Quantity | 1 |
| Shipping Weight | 0.43 |
You must be logged in to post a review.
Reviews
There are no reviews yet.