Description
Full length sizing is the workhorse step for most 6mm BR reloaders, and this Forster die handles it with the kind of precision the brand built its name on. It works your brass back toward factory specs so it chambers cleanly in any standard 6mm BR rifle, which is exactly what you want when you are running a bunch of brass through the press and need every case to behave the same. In a single pass it sizes the case neck, shoulder, and body, bumps the shoulder to set headspace, deprimes the old primer, and expands the neck.
What Sets the Forster 6mm BR Die Apart
Every Forster die is machined by hand using one-piece reamers, and the company doesn't split its lineup into budget and premium tiers. There's one grade, and it's the Bench Rest grade, so this full length sizer carries the same tolerances as the dies competitive reloaders reach for. The elevated "E-Z" out expander ball is the detail that quietly makes the job easier. By positioning the expander higher in the die, Forster keeps the case better supported as the neck pulls over the ball, which helps hold concentricity and keeps sizing smooth from the first case to the last.
Getting the Most From This 6mm BR Sizing Die
A vent hole in the die body lets trapped air and excess lube escape, so you avoid the dented shoulders and hydraulic damage that can show up with cheaper dies. A light coat of case lube on the body and shoulder before each pull keeps things gliding and protects both your brass and the die. Pair it with a shell holder for your press and you are ready to size.
This die ships individually, so it slots right into a setup you already own or kicks off a fresh 6mm BR die collection. Reloaders who care about accuracy and want their brass to last through plenty of firings tend to make Forster full length sizers their starting point, and the 6mm BR version holds up to that reputation nicely.
Key Specifications
- Manufacturer: Forster Products
- Caliber: 6mm BR
- Die Type: Full Length Sizing Die
- Die Series: Bench Rest
- Gun Type: Rifle
- Dies In Set: 1
- Expander System: Elevated E-Z Out Expander Ball
- Construction: Hand-machined with one-piece reamers
- Manufacturer Part Number: 018121
- UPC: 757253002281
- Shipping Weight: 0.51 lbs
What’s Included
- Forster 6mm BR full length sizing die
- Expander ball and decapping assembly
- Die lock ring
Frequently Asked Questions
What does the Forster 6mm BR full length sizing die do?
It sizes the case neck, shoulder, and body in a single pass, bumps the shoulder to set headspace, deprimes the spent primer, and expands the neck. That full length work returns your 6mm BR brass toward factory dimensions so it chambers reliably in any standard rifle. It is the go-to die for reloaders who run a lot of brass or switch cases between rifles.
Is this the same as Forster's Bench Rest die?
Yes. Forster makes a single grade of die and it is all Bench Rest quality, so this full length sizer carries the same hand-machined tolerances found throughout the Bench Rest line. There is no separate budget version to step up from.
Does this 6mm BR die use interchangeable neck bushings?
No, this is the standard full length sizing die with a fixed expander ball, not the bushing model. If you want to fine-tune neck tension with interchangeable bushings, Forster offers a separate Bushing Bump die for 6mm BR. This die handles conventional full length sizing with the elevated E-Z out expander.
What else do I need to use this die?
You will need a reloading press and the correct shell holder for 6mm BR, since neither is included with the die. A quality case lube is also a must for full length sizing to keep brass moving smoothly and protect both the cases and the die. The die itself comes ready to thread into any standard press.




Reviews
There are no reviews yet.