0
0

Forster 6.5 Creedmoor Full Length Sizing Die | Bench Rest 005348

UPC: 757253992094

$57.99

12 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Forster built its reputation on dies that are machined to tight tolerances and finished by hand, and this 6.5 Creedmoor full length sizing die is a perfect example of that philosophy. It resizes the entire case, bumps the shoulder back to reset headspace, deprimes the old primer, and expands the neck all in one stroke. The result is brass that drops cleanly back into a SAAMI minimum chamber with minimal play, which is exactly what you want when you are chasing tighter groups out of your 6.5 Creedmoor rifle.

What Sets This Forster 6.5 Creedmoor Sizing Die Apart

The standout feature is the exclusive E-Z Out expander ball. It is an elevated, floating design that the neck passes over while most of the case is still captured in the die body. That keeps the neck from pulling off center during the expanding stroke, which is where a lot of runout creeps in with other dies. It also reduces the effort needed to draw the expander back through the neck. The expander ball runs about .001 inch under bullet diameter, so with normal brass springback you end up with roughly .002 inch of bullet grip.

Fit and Setup for the Forster Full Length Die

The die body uses standard 7/8-14 threads, so it works in conventional single stage and turret presses as well as the Forster Co-Ax. If you run it in a Co-Ax press you will not need a shell holder, since those presses do not use one. In any other press, grab the shell holder your press manufacturer recommends for 6.5 Creedmoor. A precisely placed vent hole lets trapped air and lube escape so you do not dent cases or damage the die.

Why Reloaders Reach for Forster Dies

Each die is cut with one-piece reamers to keep every machined diameter concentric, then made from quality steel and hand polished before and after heat treating. Whether you are loading match ammo or just want dependable, repeatable brass prep, this die earns its spot on the bench. It is made in the USA and backed by Forster's long-standing name in precision reloading gear.

Key Specifications

  • Manufacturer: Forster Products
  • Cartridge: 6.5 Creedmoor
  • Die Type: Full Length Sizing Die
  • Die Series: Bench Rest
  • Thread: 7/8-14
  • Material: Case Hardened Steel
  • Expander System: E-Z Out Floating Expander Ball
  • Expander Ball: 0.001 in under bullet diameter
  • Country of Origin: Made in USA
  • Manufacturer Part Number: 005348
  • UPC: 757253992094
  • Shipping Weight: 0.5 lb

What’s Included

  • One Forster full length sizing die
  • Decapping assembly with decapping pin and floating expander ball
  • Forster die body ring
  • Instructions
  • Die box

Frequently Asked Questions

Does the Forster 6.5 Creedmoor full length sizing die come with a shell holder?

No, a shell holder is not included and is sold separately. If you run this die in a Forster Co-Ax press you will not need one, since those presses do not use a shell holder. For any other press, use the shell holder your press maker recommends for 6.5 Creedmoor.

What does the E-Z Out expander ball actually do?

It is an elevated, floating expander that the neck passes over while the case is still mostly captured in the die. This keeps the neck from pulling off center during the expanding stroke, which helps hold concentricity and reduces runout. It also takes less effort to draw back through the neck compared to a standard expander.

Will this die work in my standard reloading press?

Yes. The die body uses the industry standard 7/8-14 thread, so it threads right into conventional single stage, turret, and progressive presses. It also drops straight into a Forster Co-Ax press for anyone running one.

Is this a full length die or a neck sizer?

This is a full length sizing die. It sizes the case neck, shoulder, and body in one pass, bumps the shoulder back to set headspace, deprimes, and expands the neck. That brings fired brass back to dimensions that chamber cleanly in a SAAMI minimum chamber.

Additional information

UPC

757253992094

Manufacturer

Manufacturer Part Number

005348

Shipping Weight

0.5

Reviews

There are no reviews yet.

Be the first to review “Forster 6.5 Creedmoor Full Length Sizing Die | Bench Rest 005348”