Description
The Forster Full-Length Sizing Die for .223 Rem / 5.56 NATO handles the heavy lifting of case prep in one pass. It sizes the case neck and body, bumps the shoulder back to set headspace, deprimes the case, and expands the neck so your fired brass comes back to SAAMI minimum dimensions and drops right back into the chamber. If you shoot an AR or a bolt gun in .223 and want your reloads running clean and consistent, this is the die doing the foundational work.
What sets Forster apart from a standard sizer is the E-Z Out expander ball. The expander sits higher in the die than most competitors, so the case neck is still supported by the neck-sizing portion of the die when the ball passes back through on the upstroke. That setup keeps the neck and case axis in alignment and cuts down on runout, which is a big part of why reloaders chasing accuracy reach for these. Forster builds every die by hand with one-piece reamers, and hand polishes them before and after heat treating, so you get tight tolerances and a smooth finish right out of the box.
Why the Forster .223 Full-Length Die Earns Its Spot
There's no cheaper or premium tier here. Forster makes one grade of die, and it's their bench rest quality across the board, so this is the same tool their precision crowd runs. The decapping and expander assembly comes set from the factory, with knurled knobs that make adjustment painless when you need to fine-tune. A precisely positioned vent hole lets trapped air and excess lube escape, which protects both your cases and the die itself.
Setting Up the Forster Sizing Die for .223 Rem / 5.56 NATO
The Forster die body ring works in a standard 7/8-14 threaded press and in a Forster Co-Ax press. Keep in mind this is a sizing die, not a full set, so you'll pair it with a seating die to complete your loading bench. A shell holder is sold separately for threaded presses, though you won't need one if you're running a Co-Ax. Made in the U.S.A. and built to last through plenty of brass.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number (MPN): 005181
- UPC: 757253000768
- Cartridge: .223 Rem / 5.56 NATO
- Die Type: Full-Length Sizing Die
- Die Series: Bench Rest
- Thread: 7/8-14 (standard press and Forster Co-Ax compatible)
- Expander System: E-Z Out Floating Expander Ball
- Machining: Hand-machined with one-piece reamers
- Country of Origin: United States
- Shipping Weight: 0.52 lb
What’s Included
- One Forster Full-Length Sizing Die (.223 Rem / 5.56 NATO)
- Decapping assembly with decapping pin and floating E-Z Out expander ball (factory installed)
- Forster die body lock ring
- Die storage box
Frequently Asked Questions
What does the Forster full-length sizing die do in one stroke?
It sizes the case neck and body, bumps the shoulder back to set headspace, deprimes the case, and expands the neck. That returns your fired .223 / 5.56 brass to SAAMI minimum dimensions so it chambers smoothly again. It's the core sizing step in a typical reloading workflow.
Do I need a shell holder with this Forster die?
If you're running a standard 7/8-14 threaded press, yes, you'll need the correct shell holder and it's sold separately. If you're using a Forster Co-Ax press, you don't need one since the Co-Ax uses a universal jaw system instead of shell holders.
Is this a complete die set or just the sizing die?
This is the full-length sizing die on its own, not a two-die set. You'll want to add a seating die to have everything needed to load a finished round. Forster offers matching bench rest seater dies if you want to build out the set.
What makes the E-Z Out expander on the Forster die better for concentricity?
The expander ball sits higher in the die than on most designs, so the neck is still captured by the die when the ball draws back through on the upstroke. That keeps the neck and case axis aligned and reduces runout. It's one of the main reasons precision reloaders favor these dies.





Reviews
There are no reviews yet.